Loading ...
Loading ...
Loading ...
16
3 Press / to allocate a number to
this radio station, then press and hold
PROG/CLOCK SETWRFRQÀUP
4 Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1 In tuner mode, press / to select a
preset number.
2 Press /ENTERWRFRQÀUP
You can also press the numeric buttons
to select a preset number directly.
You can press
/ENTER to switch
between mono and stereo signals.
Tip
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
Display RDS information
1 For an FM station with RDS, press
RDS/DISPLAY repeatedly to display
various broadcast information.
5 Press ENTERWRFRQÀUP
6 Press / to switch between [Y] and
[N].
[Y]: reset all DAB/FM radio stations.
[N]: preset radio stations remain
unchanged.
7 Press ENTERWRFRQÀUP
Listen to FM radio
Tune to a radio station
1 Press TUNER to select FM.
2 Press / WRWXQHWRDVSHFLÀF
frequency.
Play starts automatically. »
Tip
You can press MODE/SCAN to tune to
the next station with strong reception
automatically.
Program radio stations automatically
You can program a maximum of 30 preset
radio stations (FM).
1 In the tuner mode, press and hold
MODE/SCAN to activate automatic
program mode.
All available stations are programmed »
in the order of waveband reception
strength.
7KHÀUVWSURJUDPPHGUDGLRVWDWLRQLV»
broadcast automatically.
Program radio stations manually
You can program a maximum of 30 preset
radio stations (FM).
1 Tune to a radio station.
2 Press PROG/CLOCK SET to activate
program mode.
EN
Loading ...
Loading ...
Loading ...