Loading ...
Loading ...
Loading ...
8
• Accurate maintenance guarantees good
functioning and long-lasting performance.
• Particular care is due to the grease filter panel. It
can be removed by pushing its handle toward the
back side of the rangehood and pulling the filter
downwards so to unfasten it from its slot (Fig.1).
To insert the filter just perform the opposite
operation.
• The grease filter needs cleaning by regular
handwashing or in dishwashers every two
months or 30 continuous hours, depending on its
use. Button lights will flash when filter needs to
be cleaned. To reset, press and hold the the 01
button for 2 seconds when the motor is off.
Filters may require cleaning sooner if
frequent heavy frying is done.
• To clean the appliance itself, water and detergent
are recommended, while abrasive products
should be avoided. For steel appliances
specialized detergents are recommended (please
follow the instructions indicated on the product
itself to obtain the desired results).
To remove the rangehood from the cabinet,
remove the fixing screws (fig. 5A) using a
screwdriver, and remove the grease filters
(fig.1).
• Push down on the small handle of the springs,
which are inside the rangehood, with the
necessary strength to unhook the hood from the
cabinet.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
MAINTENANCE
WARNING
NOTE
AGITBG (fig. 6)
A: Motor switch on speed 1/off - (low/simmer)
B: Motor switch on speed 2 - (general cooking)
C: Motor switch on speed 3 - (high power)
D: Motor switch on speed 4 - (booster)
E: Light on/off switch
USING THE RANGEHOOD
(Fig.6)
Loading ...
Loading ...
Loading ...