Loading ...
Loading ...
Loading ...
21
MOP CLEANING (OPTION)
1. Attach the ultra microfiber mop to the Velcro
of the mop plate as shown in the figure.
※
To prevent the Roboking 2.0 from
malfunctioning, attach the mop so that the
mop attaching guide will not be covered by
the mop.
2. Accurately match up and insert the mop plate
fixing hook on the lower section of the
Roboking 2.0 into the fixing groove of the
mop plate.
3. When you accurately match up and press the
mop plate to the rear side of the Roboking 2.0,
it will mount with a clicking sound.
※
Be careful to properly mount the mop plate,
or it can separate during cleaning.
For mop cleaning, mount the mop and mop plate to the Roboking 2.0 according to the following instructions:
By attaching the ultra microfiber mop, you can
effectively use the Roboking 2.0 to remove dust
from hard floors.
When the mop plate is attached, the Roboking 2.0
will not climb on to carpets or over thresholds, in
order to prevent transferring dirt from the mop.
• To avoid odors, wash any foreign material or dust off the mop after cleaning is complete.
• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is mixed with
liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not clean the
carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture, it can interfere with the navigation.
Ultra microfiber mop
Mop plate
Mop plate
Fixing hook
Fixing groove
“Click!”
Ultra microfiber mop
Ultra microfiber mopUltra microfiber mop
Mop fixing section With mop attached
Bottom camera sensor
Tip
Loading ...
Loading ...
Loading ...