Loading ...
Loading ...
Loading ...
6
ENGLISH
(Original instructions)
u Be aware of falling debris when cutting the higher slides of
a hedge.
Additional power tool safety warnings
@
Warning! Additional safety warnings for shears
u Never allow people unfamiliar with these instructions or
children to use the machine. Local regulations can restrict
the age of the operator.
u Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
u Never operate the machine while people, especially
children, or pets are nearby.
u Use the machine only in daylight or good artificial light.
u Always ensure that the ventilation openings are kept clear
of debris.
u Use only the manufacturer's recommended replacement
parts and accessories.
u Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
Safety of others
u This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
u Children should be supervised to ensure that they do not
play with the appliance.
Vibration
The declared vibration emission values stated in the technical
data and the declaration of conformity have been measured in
accordance with a standard test method provided by
EN 60745 and may be used for comparing one tool with
another. The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Warning! The vibration emission value during actual use of
the power tool can differ from the declared value depending
on the ways in which the tool is used. The vibration level may
increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the
trigger time.
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
O
Wear safety glasses or goggles when operating this
tool.
R
Do not expose the tool to rain or high humidity.
L
Beware of sharp blades. Blades continue to move
after the motor is switched off.
Beware of ying objects. Keep bystanders away.
Additional safety instructions for batteries and
chargers
Batteries
u Never attempt to open for any reason.
u Do not expose the battery to water.
u Do not store in locations where the temperature may
exceed 40 °C.
u Charge only at ambient temperatures between 10 °C and
40 °C.
u Charge only using the charger provided with the
appliance/tool. Using the wrong charger could result in an
electric shock or overheating of the battery.
u When disposing of batteries, follow the instructions given
in the section "Protecting the environment".
u Do not damage/deform the battery either by puncture or
impact, as this may create a risk of injury and fire.
u Do not charge damaged batteries.
u Under extreme conditions, battery leakage may occur.
When you notice liquid on the batteries carefully wipe the
liquid off using a cloth. Avoid skin contact.
u In case of skin or eye contact, follow the instructions
below.
Loading ...
Loading ...
Loading ...