Loading ...
Loading ...
Loading ...
12
Setting Up
Checking the connections
Check all connections from the receiver to the powered Acoustimass
®
module and from the
module to the cube speakers (Figure 5 and Figure 6). Make sure the cube speakers are con-
nected to the proper terminals according to their position in your room. Check that the wires
are connected to your surround receiver in phase (+ to + and – to –). Correct wiring problems
before you plug your receiver in and turn it on.
Connecting the Acoustimass module to power
Note: Bose
®
recommends using a quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be pur-
chased at an electronics store.
After you have checked all system connections, plug the power cord of the powered Acousti-
mass module into an AC (mains) receptacle. Your Acoustimass speaker system will turn on
and off automatically as it receives a signal from your surround receiver.
264887_00 _V.pdf • August 13, 2002
Loading ...
Loading ...
Loading ...