Loading ...
Loading ...
Loading ...
1312
GETTING STARTED
Using Your HUSHTONE
™
6Q Backpack
1
Check to ensure both filter bag
and HEPA filters are assembled
in the unit. Insert hose end firmly
into hose inlet, with elbow turned
toward vacuuming side.
3
Position lower rear pad into the
small of back so that weight of
machine is resting on the hips,
and not shoulders.
2
Loosen shoulder straps then
lift backpack, sliding both arms
through shoulder straps.
CAUTION
TO REDUCE THE RISK OF PERSONAL INJURY: UNGPLUG BEFORE CLEANING OR SERVICING.
NOTE: Do not use vacuum without both filter bag and HEPA filters in place.
Harness Adjustment
1
Tighten waist strap
until secure and
comfortable.
NOTE: Should you
require additional
length, the extension
belt can be placed
between belt ends and
adjusted to desired
length.
4
Slide sternum straps
up or down for
adjustment.
2
Pull down on ends of
shoulder straps until
upper harness touches
shoulder blades.
Nearly all weight of
machine should be on
hips. You should be
able to easily slide your
finger between each
strap and shoulder.
Retighten waist band
if necessary.
5
Plug in quick-change
cord to extension cord
and thread extension
cord through the Cord
Lock on waist belt.
3
Connect the sternum
strap buckle and
tighten or loosen as
needed.
NOTE: The ergonomic harness is designed to easily identify the steps for wearing the backpack
correctly. Look for the numbered arrows on the corresponding parts called out in the directions below.
Press orange switch to
power up the unit.
ON: Hush
™
mode
quiet cleaning
BOOST: High traffic
area cleaning
Turn off by returning
switch to center position.
Loading ...
Loading ...
Loading ...