Loading ...
Loading ...
Loading ...
20
HOT / COLD / WARM WATER WASH
This top load washing machine must be connected to both a cold and a hot water tap.
With both hoses connected to a cold and hot water tap, you can set the washer to use
either just cold water for a cold water wash, or just hot water for a hot water wash, or both
hot and cold water for a warm water wash.
To select the wash temperature, press the TEMPERATURE button.
- COLD WASH: the indicator light is off.
- WARM WASH: the indicator light is on.
- HOT WASH: the indicator light is flashing.
SETTING THE WATER LEVEL AND OTHER PROCESSEs
You can set the water level for wash and rinse processes. For example, if you are
sensitive to detergent residues in your washing, you may want to select a higher water
level for rinsing.
TO SET DIFFERENT WATER LEVELS:
- Press the PROCESS button until the WASH light flashes; press the WATER LEVEL
button to choose the appropriate water level (it will be shown on the display
screen); press the SET button to set the wash time.
- Then press the PROCESS button until the RINSE light flashes; press the WATER
LEVEL button to choose the appropriate water level; press the SET button to set
the number of rinses.
TO SET OTHER PROCESSES:
- Then press the PROCESS button until the SPIN light flashes; press the SET button
to set the SPIN time.
- Finally press the START/PAUSE button: the washer will start operating according
to the set values for wash and rinse water levels, number of rinses and spin time.
ADDING FABRIC SOFTENER
You can program the washing machine to stop before the last rinse so that you can add
fabric softener.
- Press and hold the WATER LEVEL button for 3 seconds to set the “Add Softener”
program. Before the final rinse, the machine will stop and “SF” will show on the
display. It will also play a beep sound to alert you to add fabric softener.
- You can add the diluted (mix with water) softener directly into the tub, then
close the lid and press the START/PAUSE button to continue the program.
NOTE: If you disregard the alarm, the machine will repeat the alarm twice after 5 minutes
of inactivity, and then resume the program.
HOW TO USE (Cont.)
Loading ...
Loading ...
Loading ...