Loading ...
Loading ...
Loading ...
Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator (Start/Pause) – Press to switch on, the indicator will light
START – Press START to commence the selected drying programme. Press for 5 seconds
to cancel/reset the programme
Acrylics/Synthetics button (Schontrocknen) – Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting the
programme must be reset
Low Heat – Indicator light ON High Heat – Indicator light OFF
Empty Water indicator (Wasserbehälter leeren) – lights when the water container is full
Filter Care indicator (Filter Säubern) – lights when the filter needs cleaning
Start Delay button (Startzeitvorwahl) – Allows the user to delay the start of the drying
cycle (see details of operation page 16)
RESTZEIT Display
START – When the dryer is switched On the START indicator will flash, when the
programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of the
programme
15' - Indicator lights when there is less than 15 minutes left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool Down phase
STOP - Indicator lights when the programme is finished.
6h - 6 hour start delay (light flashes when in operation)
9h - 9 hour start delay (light flashes when in operation)
11
Controls and indicators
ACRYLICS/
SYNTHETICS
BUTTON
(SCHONTROCKNEN)
ON/OFF
BUTTON
(START/
PAUSE)
FILTER CARE INDICATOR
(FILTER SÄUBERN)
EMPTY WATER INDICATOR
(WASSERBEHÄLTER LEEREN)
PROGRAMME
SELECTOR
START
BUTTON
START DELAY
BUTTON
(STARTZEIT-
VORWAHL)
COUNTDOWN
DISPLAY
(RESTZEIT)
40003646Eng.qxd 02/08/2005 14:06 Page 11
Loading ...
Loading ...
Loading ...