25300 AL MOEN DRIVE NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379-2720
WWW.MOEN.COM
Copyright Creative Specialties International Literature #BA1342
Glass Shelf posts and rail are
constructed of zinc. Shelf is tempered
glass.
YB5890BB – Glass Shelf
Brushed Bronze Finish
YB5890BN – Glass Shelf
Brushed Nickel Finish
YB5890CH – Glass Shelf
Chrome Finish
Cleaning Instructions:
This product features the Pro+Fit Installation Mounting System. If you do not have
the Pro+Fit Installation Template please use the following instructions. (Note: only
one hole is required per mounting post.)
1. Find the appropriate center to center measurement for the product you are
installing.
2. Mark that distance on the wall where you want to install the product.
3. Use a level to ensure that the pilot holes will be perfectly level.
4. Using ¼” drill bit, drill one pilot hole for each post.
5. Position mounting post to wall by inserting wall anchor into pilot hole and
pressing firmly.
6. Make sure that locking tab on mounting post is facing down (6 o’clock).
7. Tighten wall anchor screw while holding mounting post firmly in place. DO
NOT over tighten (6 – 8 full turns will secure the anchor).
8. Shelf must be attached to mounting posts as a unit – insert shelf into each post.
9. Attach posts by pressing firmly to mounting posts until it clicks. (The square
opening at the base of the post must be facing down to match-up with locking
tab.)
If you are mounting any parts into a hard surface snap off the anti-rotation fins on
the back of the mounting posts.
Stock Number:______________________Glass Shelf
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf
YB5890
Icon™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
