Loading ...
Loading ...
Loading ...
Customizing the
Timekeeping Mode Screen
You can use G-SHOCK Connected to
rearrange display items on the Timekeeping
Mode, and to add or remove items.
Important!
●
Note that you cannot use watch
operations to configure display item
settings. Use G-SHOCK Connected to
configure settings.
The items below can be displayed.
●
Day of the week, month, day
●
Year, month, day *
●
Barometric pressure graph, month, day
●
Barometric Pressure Graph *
●
Hour, minute, second
●
World Time hour, minute *
●
Step count
●
Home Time City sunrise/sunset times *
* Item that can be added using G-SHOCK
Connected. These items are not displayed
under initial default settings.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
Trying to connect Connection
successful
3.
Y
Perform the operations shown on the
phone screen to configure mode settings.
Viewing Step Count Data
G-SHOCK Connected can be used to view the
information below, which is measured by the
watch.
●
Your step count and physical exertion over
the past 24 hours
●
Weekly number of steps, calories burned
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
When a connection is established
between the watch and phone, [APP] will
change to [OK], and the second hand will
move from [R] to [C].
Trying to connect Connection
successful
3.
Y
Follow the instructions on the screen to
display pedometer data.
Note
●
You can also use G-SHOCK
Connected to specify a daily step
target.
●
Though the step count is displayed on
the watch in real time, G-SHOCK
Connected displays step counts at the
time when a connection is established
between the watch and phone.
Because of this, the step counts
displayed by G-SHOCK Connected
may be different from those displayed
by the watch.
Recording Your Current
Location (Location Memory)
You can use G-SHOCK Connected to record
current location information.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Enter the Timekeeping Mode or
Compass Mode.
l
Navigating Between Modes
3.
X
Hold down (C) for at least five seconds
until [MEMORY] starts to flash. Release
the button when the second hand points
to [R] twice.
If location information is successfully
acquired after a connection is established
between the watch and phone,
[MEMORY] will change to [OK], and the
second hand will move from [R] to [C].
●
[ERR] will appear on the display if
connection fails for some reason.
●
[FAILED]
n
[POSITION] will appear in
sequence if location information
acquisition fails for some reason.
Trying to connect Connection
successful
4.
Y
Perform the operation shown on the
phone screen to view the Location
Memory information record.
●
You can have only one location record
in memory. Saving location information
while there is already a location record
in memory will overwrite the existing
record with the new information.
Note
●
If there is location information stored in
Location Memory, you can use
Location Indicator to check the
distance and bearing to the stored
location.
l
Checking the Distance and
Bearing to a Location Memory
Point (Location Indicator)
Operation Guide 5594
11
Loading ...
Loading ...
Loading ...