USER INSTRUCTIONS
Reflector Series
MODEL:GLLEDXA300C
The IR(Infra Red) diodes looks dim, this
is normal, no worry.
IR promote cell division, helps germination, leaf building
1
Dear users,
Thank you for choosing our products! Your decision to purchase
this light will reward you with
a high-grade product bringing joy
to you and your plants. Please
read this instruction carefully
before using your lights.
Handling. Set up our light in the operating environment that
allows for adequate air circulation. Never push objects into the
ventilation openings.
Indoor use only. Not water-proof, protect your light from
dampness.
Power cord. Your AC cord has a three-wire grounding plug (a plug
that has a grounding pin).
This plug
only a grounded AC
outlet. If
unable to insert the plug into an outlet because the
outlet
grounded, contact a licensed electrician to replace the
outlet with a properly grounded one. Do not defeat the purpose of
the grounding pin.
Repairing. If your light needs service, please contact us. Opening
the light to inspect or repair with our permission will not a
ect
your existing warranty. However, if you open the light or install
items in it without our permission, you risk damaging your light.
Such damage
covered by the limited warranty.
Clean ing. Wh en cleanin g the outside of your light and its
components,
shut down your light, then unplug the power
cord. Then dampen a clean, soft, lint-free cloth to wipe the light.
Avoid getting moisture in any openings.
Extremely bright. Do not look directly at the LED bulbs when the
light is working.
Important Safety Information
SAFETY INFORMATION
Package includes:
1 x GLLEDXA300C LED Lighting
1 x Hanging Kits
1 x 6ft Power Cord
Specifications
*ON/OFF switch: power on/power off.
*Input plug: we recommend to use a standard three-wire grounding plug.
*Daisy chain connection: for safety's sake, max link 1000W ≤ true watts (about
7pcs GLLEDXA300C).
2
SPECIFICATIONS
GLLEDXA300C
300W
135W
60pcs Epileds/Bridgelux LEDs
＜15%
AC100-240V
50-60Hz
HID Replacement:
Max Coverage at 24” Height:
Core Coverage at 24” Height:
Use for:
Dimensions:
Item Weight:
Lifespan:
250W HPS/MH
3x3t
2x2t
All stages grow and flowering
12.6x7.9x3 inches
5.6 lbs
100,000 hours
Model:
LED Power:
Avg.Power Draw:
LED Quantities:
Total Harmonic:
Input Voltage:
Frequency:
Daisy chain connection
Input plug
ON/OFF switch
Installation. Using the included hanging kits, hook them into
the top of the light. Hanging the light to a hard, stable bracket
or the ceiling of grow tent. You can also buy our YOYO hangers
that allows you to adjust the height of your light to a proper
position.
Hanging height. For seedlings, we recommend being very
well the individual strain of plant takes the increased intensity.
The key is to always watch your plants and be receptive to what
light, they love it! Give them more! If they shy away and look
limp or unhappy and yet ALL your other environmental
variables are correct, back o
Time. We would recommend running the lights in an 18 on/6
o
type of light pattern for any vegetative growth of any plant.
How many lights. This light is designed to cover a 2 by 2 feet
can always add another light if you desire more lights.
3
USING SUGGESTIONS
You can use this light for the whole stages
doing. Just need to adjust the height according
to desire of different plants.
Photo Parameters
Flux:4713.4 lm E
.:34.05 m/w Radiant:209052.0 mW
lv:0.0mcd
Ele. Parameters
Voltage: U=108.7V Current: I=1.274A
Power:P=138.3W Power Factor: PF=0.999
basically what enables plants to eat, plants require light to eat
or they will starve and die even with a full nutrient compliment
to their root zone.
Photosynthesis converts light into chemical energy within the
plant which then gives the plant fuel to perform certain
activities, much like solar panels generating electricity to allow
you to perform certain activities within the household.
Think of your leafs as your plants solar panels, the more leafs
it has the more it can photosynthesize and therefore the more
food it can absorb.
Output Spectrum Test Report
4
PHOTOSYNTHESIS
0.5
400 450 500 550 600 650 700 750
1.0
For decades now growers have been obsessed with the
lumen output of their lamps, misguidedly thinking that
the more lumens then the better the light is for the plant.
Lumens is how we started to measure light back in the
day and is a measurement by its availability to the human
eye curve and is the industry standard way of measuring
any lamp.
Plants do not even recognize what a lumen is , but
instead rely on photons hitting the surface of the leaf to
make them grow, these photons we call
PAR(photosynthetic active radiation). PAR is measured in
micromoles(
mol m-2 s-1) and is basically a count of the
photons hitting a surface that are available for use by the
plant.
5
PAR VALUE (µmol m-2 s-1)
