Loading ...
Loading ...
Loading ...
Tips
201
Storing Your Honda
(cont’d)
Refer to Safety Precautions on page 95.
1.
Change the engine oil and filter (page 127).
2.
Make sure the cooling system is filled with a 50/50% antifreeze
solution (page 136).
3.
Add Pro Honda Fuel Stabilizer or equivalent to the fuel tank
before filling it with fuel. Fill the fuel tank. Make sure the fuel fill
cap is properly installed. Run the engine so that the treated fuel
will circulate into the fuel injector.
4.
To prevent rusting in the cylinder, perform the following:
• Remove the seat back (page 112) and center rear panel
(pages 113, 115), and disconnect the spark plug cap from the
spark plug.
• Remove the spark plug.
Do not connect the spark plug to the spark plug cap.
• Pour a tablespoon (15 – 20 cc) of clean engine oil into the
cylinder and cover the spark plug hole with a piece of cloth.
• Turn the ignition switch to the START (p) position and crank
the engine several times to distribute the oil.
• Reinstall the spark plug, spark plug cap, center rear panel, and
seat back.
Preparation for Storage
Loading ...
Loading ...
Loading ...