Sun Joe 20VIONLT-BLW-SJB-RM 20-Volt iON Cordless Blower/Sweeper Kit W/ 2.5-Ah Battery and Charger Certified Refurbished, Blue

OPERATOR’S MANUAL - Page 10

For 20VIONLT-BLW-SJB-RM.

PDF File Manual, 16 pages, Read Online | Download pdf file

20VIONLT-BLW-SJB-RM photo
Loading ...
Loading ...
Loading ...
10
4. When the charger base light turns green, the battery is
fully charged (Fig. 5).
NOTE: If the charger plug light remains green while the charger
base light alternately ashes red and green, this indicates a
temperature abnormality (i.e. that the battery pack is either too
hot or too cold).
5. A fully discharged pack with an internal temperature in
the normal range will fully charge in 90 mins (between
32ºF/0ºC and 113ºF/45ºC). Heavily cycled battery packs
may take longer to charge completely.
6. If the light indicators do not come on at all, check that
the battery pack is fully seated into the bay. Remove
the pack and reinsert. If the problem persists, contact
an authorized Snow Joe
®
+ Sun Joe
®
dealer or call
the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
7. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger (Fig. 6).
8. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Charging a Hot or Cold Battery Pack
A red and green ashing indicator light on the charger base
indicates that the battery pack temperature is outside the
charging range. Once the pack is within the acceptable
range, normal charging will take place and the red light will
be continuous. Hot or cold battery packs may take longer to
charge.
Operation
Starting and Stopping
mCAUTION! Starting, stopping, and restarting an DC
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of
your cordless blower, always wait at least ve seconds after
stopping before restarting the blower.
1. Insert the battery in the battery compartment (Fig. 7).
3. To start the cordless blower, slide the ON/OFF switch to
the "ON" position (Fig. 8).
Fig. 5
red
Charging
green
Charged
Temperature abnormal
Green
Plug light
Flashing
red/green
Base light
Fig. 6
Push lock
button
Battery Pack
Temperature
Lithium-Ion Charging Status
Too hot Flashing Not charging
Normal range Red Normal charging
Too cold Flashing Not charging
Charger Base
Indicator Light
Charging
Status
Fig. 7
Loading ...
Loading ...
Loading ...