A Division of Snow Joe
®
, LLC Model HJ15HTE-RM Form No. SJ-HJ15HTE-RM-880E-V1
R
OPERATOR’S MANUAL
A Division of Snow Joe
®
, LLC
OPERATOR’S MANUAL
Model SPX2598-MAX-RM Form No. SJ-SPX2598-MAX-RM-880E-V1
R
ELECTRIC PRESSURE WASHER
2000 PSI MAX* | 1.6 GPM MAX* | 13-AMP
THANKS FOR YOUR PURCHASE
OF A REMANUFACTURED PRODUCT.
snowjoe.com
To make sure you get the most out of
your
product, be sure to register online at
to enjoy full product support.
PASTE UPC LABEL HERE
A Division of Snow Joe
®
, LLC Model 24V-AJC-LTE-RM Form No. SJ-24V-AJC-LTE-RM-880E-V1
R
OPERATOR’S MANUAL
CORDLESS AIR COMPRESSOR
24-VOLT | 2.0 AH | DIGITAL CONTROL | ADAPTERS
A Division of Snow Joe
®
, LLC Model SPX3000-RM Form No. SJ-SPX3000-RM-880E-V1
R
OPERATOR’S MANUAL
14.5A ELECTRIC PRESSURE WASHER
2030 PSI MAX PRESSURE AT INITIAL DISCHARGE PER CSA INTERNAL PRESSURE TESTING
1.76 GPM MAX FLOW WITH NOZZLE OPEN AT MINIMUM PRESSURE
ELECTRIC HEDGE TRIMMER
15-INCH | 3.8-AMP
© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
2
A Division of Snow Joe
®
, LLC Model HJ15HTE-RM Form No. SJ-HJ15HTE-RM-880E-V1
R
OPERATOR’S MANUAL
ELECTRIC HEDGE TRIMMER
15-INCH | 3.8-AMP
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this hedge trimmer must read,
understand, and follow these instructions in their entirety.
Failure to follow these instructions may result in ELECTRIC
SHOCK, FIRE, and/or serious PERSONAL INJURY.
Notice the personal safety alert symbol
m used in this
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
mWARNING! This unit can be dangerous! Careless or
improper use can cause serious injury.
mWARNING! The moving blades can cut you. Keep
hands and feet away from the blades and the cutting area.
Before using the hedge trimmer, familiarize yourself with
the controls, especially how to stop the hedge trimmer in
an emergency. The only individuals who should use the
hedge trimmer are those who thoroughly understand these
instructions and know how to properly operate the unit.
Children should never be allowed access to the hedge trimmer.
Retain this manual for future reference and reread it at the start
of each trimming season.
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Replacement parts – When servicing this unit, use only
identical replacement parts. Replace or repair damaged
cords immediately.
3. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
4. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls.
5. Use the right tool – Do not use this machine for any job
except that for which it was intended.
6. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
7. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
8. Avoid accidental starting – Do not carry the hedge
trimmer with your nger on the switch. Make sure the
switch is o before plugging in or unplugging the unit.
mCAUTION! Moving parts will continue to run for several
seconds after turning o the machine.
9. Do not abuse the cord – Never carry the hedge trimmer
by the cord or yank the cord to disconnect it from the
receptacle. Keep the cord away from heat, oil, and sharp
edges.
10. Moving parts – Keep hands and feet away from moving
parts. Keep guards in place and in proper working order.
11. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
12. Do not overreach – Keep proper footing and balance at
all times.
13. Use safety glasses – Also use safety footwear,
snug-tting clothing, protective gloves, hearing,
and head protection.
14. Disconnect the tool – Disconnect the hedge trimmer
from the power supply when it is not in use, before
servicing it, when changing accessories, and when
performing any other maintenance task.
15. Store idle tool indoors – When not in use, the hedge
trimmer should be stored indoors in a dry and high or
locked-up place out of the reach of children.
16. Maintain the hedge trimmer with care – Keep the
cutting edges sharp and clean for optimal performance
and to reduce the risk of injury. Inspect the extension
cord periodically and immediately replace it if damaged.
Keep the handles dry, clean, and free from oil and grease.
Follow the additional recommendations described in the
maintenance section of this manual.
17. Avoid dangerous environments – Do not use the hedge
trimmer in rain or in damp or wet locations. Do not operate
the hedge trimmer in gaseous or explosive atmospheres
or use the hedge trimmer near ammable or combustible
liquids. Motors in these tools normally spark, and the
sparks might ignite fumes.
3
18. Stay alert – Watch what you are doing. Use common
sense. Do not operate the hedge trimmer when you are
tired or under the inuence of drugs, alcohol, or other
medication.
19. Check for damaged parts – Before further use of the
appliance, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may aect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
Contact the Snow Joe
®
+ Sun Joe
®
customer service
center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Additional Safety Rules for Hedge
Trimmer
1. Remove any adjusting key or wrench before turning
the power tool on. A wrench or key left attached to the
rotating part of the power tool may result in personal
injury.
2. If devices or facilities are available for the extraction and
collection of dust, ensure these are connected or properly
used. Use of these devices can reduce dust related
hazards.
3. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
4. Never cut any material over 0.7 in. (18 mm) in diameter.
5. Maintain a rm grip on both handles while cutting with the
blade. Keep the blade away from body.
6. Keep both hands on the handles when the unit is in use.
7. Keep cable away from cutting area. During operation the
cable may be hidden in shrubs and can be accidentally
cut by the blade.
8. Do not use the safety guard or clipping deector as a
gripping surface.
9. Service on the product must be performed by qualied
repair personnel only. Service or maintenance performed
by unqualied personnel could result in injury to the user
or damage to the product.
10. If the power supply cord is damaged, it must be replaced
only by the manufacturer or by an authorized service
center to avoid risk.
11. Keep all parts of the body away from the cutting blade. Do
not remove cut material or hold material to be cut when
blades are moving. Make sure the switch is o when clearing
jammed material. A moment of inattention while operating
the hedge trimmer may result in serious personal injury.
12. Carry the hedge trimmer by the handle with the cutting
blade stopped. When transporting or storing the hedge
trimmer always keep the blade covered. Proper handling
of the hedge trimmer will reduce possible personal injury
from the cutter blades.
13. Do not use the hedge trimmer if the switch does not turn it
on and o. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
14. Use the hedge trimmer and accessories in accordance
with these instructions, taking into account the working
conditions the work to be performed. Use of the power
tool for operations dierent from intended use could lead
to a hazardous situation.
Electric Safety
1. Ground fault circuit interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for
this electric hedge trimmer. Receptacles are available
having built-in GFCI protection and may be used for this
measure of safety.
2. To reduce the risk of electric shock, this appliance has
a polarized plug (i.e. one blade is wider than the other).
Use this appliance only with a polarized UL-, CSA-, or
ETL-listed extension cord recommended for outdoor,
all-weather use.
The appliance plug will t into a polarized extension
cord only one way. If the appliance plug does not t
fully into the extension cord, reverse the plug. If the plug
still does not t, obtain a correct polarized extension
cord. A polarized extension cord will require the use of a
polarized wall outlet. The extension cord plug will t into
the polarized wall outlet only one way. If the plug does
not t fully into the wall outlet, reverse the plug. If the plug
still does not t, contact a qualied electrician to install
the proper wall outlet. Do not modify the appliance plug,
extension cord receptacle, or extension cord plug in any
way.
3. To prevent electric shock, use only with an extension cord
suitable for outdoor use, such as SW-A, SOW-A, STW-A,
STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.
Before use, check that the extension cord is in good
condition. When using an extension cord, make sure to
use one heavy enough to carry the current product. An
undersized cord will cause a drop in line voltage resulting
in loss of power and overheating.
4
4. To prevent the appliance cord from disconnecting from
the extension cord during operation, use the onboard
extension cord restraint hook and/or make a knot with the
two cords as shown in Table 1.
5. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
6. Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is earthed
or grounded.
7. If the supply cord is damaged, it must be replaced by an
electrician or a power tool repairer.
8. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
10. Have your tool repaired by an electrician or a qualied
service center. This power tool complies with relevant
safety requirements. To avoid danger, electrical appliances
must only be repaired by qualied personnel using original
spare parts; otherwise this may result in considerable
damage to the user.
Double-Insulated Appliances
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means
for grounding be added to the appliance. Servicing a double-
insulated appliance requires extreme care and knowledge
of the system, and should be performed only by qualied
service personnel at an authorized Snow Joe
®
+ Sun Joe
®
dealer. Replacement parts for a double-insulated appliance
must be identical to the parts they replace. A double-insulated
appliance is marked with the words “Double Insulation” or
“Double Insulated.” The symbol
(square within a square)
may also be marked on the appliance.
DOUBLE-INSULATED: GROUNDING NOT
REQUIRED. WHEN SERVICING, USE ONLY
IDENTICAL REPLACEMENT PARTS.
This hedge trimmer is double-insulated, eliminating the
need for a separate grounding system. Use only identical
replacement parts. Read the instructions before servicing
double-insulated appliances. Use this electric hedge trimmer
only as described in this manual.
m WARNING m
Electric shock may cause SEVERE INJURY or
DEATH. Heed these warnings:
• Do not allow any part of the hedge trimmer to make
contact with water while it is in operation. If the
appliance becomes wet while turned o, wipe dry
before starting.
• Use only a UL-, CSA- or ETL-rated extension cord for
outdoor, all-weather use.
• Do not use an extension cord over 100 ft (30 m).
• Do not touch the appliance or its plug with wet hands
or while standing in water. Wearing rubber boots
oers some protection.
EXTENSION CORD CHART
Extension Cord
Length
Wire Gauge (A.W.G.):
Up to 50 ft
(15 m)
+50 ft - 100 ft
(+15 m - 30 m)
16 14
(B) Connect plug and receptacle
Cord set Appliance cord
(A) Tie cord as shown
Table 1. Method of Securing Extension Cord
5
Safety Symbols
The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assemble and operate.
SAFETY ALERT – Indicates a
precaution, a warning, or a danger.
Symbols SymbolsDescriptions Descriptions
READ THE OPERATOR'S
MANUAL(S) – Read, understand,
and follow all instructions in the
user manual(s) before attempting to
assemble and operate.
WARNING! Do not expose the unit
to rain or wet conditions.
WEAR EYE AND HEARING
PROTECTION – For protection
against injury, wear ear defenders
and safety goggles.
SWITCH OFF! Remove plug from
outlet immediately if the cord is
damaged or cut.
Double Insulation.
6
Know Your Electric Hedge Trimmer
Read the owner’s manual and safety instructions carefully before operating the electric hedge trimmer. Compare the illustration
below to the electric hedge trimmer in order to become familiar with the location of the various controls and adjustments. Save
this manual for future reference.
Technical Data
Rated Voltage ................................................. 120 V ~ 60 Hz
Power ............................................................. 3.8 A
No Load Speed .............................................. 3600 ± 10% rpm
Blade Movement ............................................ Dual-action
Tooth Space ................................................... 1.1 inch (2.8 cm)
Blade Material ............................................... Rust-resistant,
....................................................................... forged-iron blades
Blade Length ................................................. 15 in. (38 cm)
Cutting Diameter Max ................................... 0.7 in. (1.8 cm)
Weight ........................................................... 4.6 lbs (2.1 kg)
1. Rear handle
2. Front handle
3. Safety guard
1234
5
6
7 8
9
4. Cutting blade
5. Blade cover
6. Safety button
7. Extension cord restraint hook
8. On/O switch
9. Appliance cord
7
Unpacking
Carton Contents
• Electric hedge trimmer
• Blade cover
• Manual with registration card
1. Carefully remove the electric hedge trimmer and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric hedge
trimmer. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
Operation
Connecting to Power Supply
This product is designed with a cord restraint hook that
prevents the extension cord from disconnecting during
operation.
1. Only connect the electric hedge trimmer to a working
120 V outlet using a heavy-duty outdoor extension power
cord.
2. Make a loop in the extension cord and push it up through
the hole in the handle and around the cord restraint hook,
then connect the extension cord to the appliance cord
(Fig. 1).
Holding the Trimmer
Before operating the hedge trimmer, stand in the operating
position and perform the following checks:
1. You are wearing all of the necessary personal protective
equipment, including protective gloves, non-slip footwear,
safety goggles, ear defenders, and close-tting clothing.
2. You are holding the unit rmly with both hands. Your right
arm is slightly bent and is holding the rear handle, and
your left arm is straight and is holding the front handle.
3. You are standing with proper footing and are holding the
hedge trimmer so that the cutting blades are always away
from your body.
mWARNING! Always keep both hands on the hedge
trimmer handles. Never hold shrubs with one hand and operate
the hedge trimmer with the other. Improper handling of the
hedge trimmer could result in serious injury.
Starting + Stopping
1. To start the tool, press and hold the hand safety switch,
then squeeze the trigger switch (Fig. 2). When the blade
starts moving and reaches to normal speed, release the
safety button and start working.
2. Release the trigger switch to stop the tool.
NOTE: This product is equipped with the electric brake
technology. The blades will stop in 3 seconds when the trigger
switch being released.
Fig. 1
Extension cord
restraint hook
Extension cord
Appliance
cord
Fig. 2
Safety button
On/O switch
8
Cutting Procedures
mWARNING! Never cut near electric cords or power
lines. If the blade jams on any electrical cable, DO NOT
TOUCH THE BLADE. IT CAN CONDUCT ELECTRICITY
AND FATALLY SHOCK YOU! Instead, continue to hold the
hedge trimmer by the insulated rear handle, and lay it down
and away from you in a safe manner. Make sure that electrical
service to the damaged electrical cable is disconnected
before attempting to free the hedge trimmer blade. Contact
with the blade, other conductive parts of the hedge trimmer,
or live electric cords or power lines will result in death by
electrocution or serious injury.
mWARNING! Clear the area to be cut before each use.
Remove all objects such as cords, lights, wire, or loose string
which can become entangled in the cutting blade and create a
risk of electric shock and serious personal injury.
• Before starting the hedge trimmer, maintain proper footing
and balance. Do not overreach. Wear safety goggles, non-
skid footwear and rubber gloves. Hold the unit with both
hands with the cutting blades directed away from you.
Always use the hedge trimmer properly.
• Do not cut too much at one time. This can cause the blades
to bind, which will reduce the cutting eciency.
• Do not force the hedge trimmer through heavy shrubs. This
can cause the blade to bind and slow down. If the blades
slow down, reduce the pace of your work.
• When trimming new growth, use a wide sweeping action,
so the stems are fed directly into the cutting blade. Older
growth will have thicker stems and will be trimmed easily by
using a sawing movement.
• Always cut stems or twigs that are less than 0.7 inch.
(1.8 cm) thick. Use a non-powered hand saw or pruning
saw to trim large stems.
Horizontal Cut
To perform a horizontal cut, hold the hedge trimmer with the
blade tilted 5-10 degrees to your cutting object; this makes
the operation easier and ensures a better cut. Use a string as
a guide of the desired hedge level. Trim the hedge just above
this guide line. (Fig. 3).
Vertical Cut
To perform a vertical cut, start trimming at the bottom and
sweep up for even cutting. Swing the blades in an arc towards
the outsides of the hedge so that the cuttings are swept on the
ground (Fig. 4).
Care + Maintenance
m
ATTENTION! Before performing any cleaning or
maintenance, disconnect the unit from the power supply.
Never touch the moving blades.
mWARNING! Never spray or clean the hedge shears with
water.
1. Clean the hedge shears with a dry towel, particularly
the ventilation slits, after each use, or use a brush in the
event of heavy soiling. Spray the blades with lightweight
machine oil after each use.
2. Store the hedge trimmer in the blade cover provided.
Store the hedge trimmer in a dry location out of the reach
of children.
3. When servicing, use only identical replacement parts. Use
of any other parts can create a hazard or cause product
damage. Please contact an authorized Snow Joe
®
+ Sun
Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563) for
all replacement parts and accessories for your product.
Fig. 3
String guide
Fig. 4
9
Lubricate the Blades
For easier operation and longer blade life, lubricate the hedge
trimmer blade before and after each use.
1. Stop the motor and disconnect the unit from the power
supply.
2. Lay the hedge trimmer on a at surface. Apply lightweight
machine oil along the edge of the top blade (Fig. 5). If you
will be using the hedge trimmer for an extended period,
it is advisable to stop work intermittently in order to re-oil
the blade.
NOTE: Do not oil while the hedge trimmer is running.
Sharpening the Blades
The blade must be re-sharpened if cutting performance and
behavior begin to deteriorate (i.e. if blades frequently snag on
branches).
1. Stop the motor and disconnect the unit from the power
supply. Clamp the blade in a vise.
2. File the exposed cutting surface of each blade tooth with
a smooth round le. Be sure to retain the original angle of
the tooth when ling.
3. Remove the blade from the vise, and power on the motor
until the unsharpened edges of the remaining blade teeth
are exposed.
4. Disconnect the hedge trimmer from the power supply and
repeat the sharpening procedure as necessary.
mWARNING! Do not operate the hedge trimmer with dull
or damaged cutting blades. This may cause overload and will
give unsatisfactory cutting results.
Cleaning the Hedge Trimmer
1. Stop the motor and disconnect the unit from the power
supply.
2. Clean dirt and debris from the body of the hedge trimmer
using a damp cloth and mild detergent.
NOTE: Do not use any strong detergents on the plastic
housing or the handle. These parts can be damaged by certain
aromatic oils such as pine and lemon, and by solvents such as
kerosene.
Storage
1. Always place the blade cover on the blade before storing
or transporting the hedge trimmer. Use caution to avoid
the sharp teeth of the blade.
2. Clean the hedge trimmer thoroughly before storing.
Store the hedge trimmer indoors, in a dry place that is
inaccessible to children. Keep away from corrosive agents
such as garden chemicals and de-icing salts.
Service + Support
If your Sun Joe
®
electric hedge trimmer requires service or
maintenance, please call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal axed to the housing or handle
of your electric hedge trimmer. Copy these numbers into the
space provided below.
Fig. 5
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
H J 1 5 H T E - R M
10
Troubleshooting
Most diculties are easy to x. Consult the troubleshooting table for common problems and their solutions. If you continue
to experience problems or need repairs beyond these minor adjustments, please call 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Troubleshooting Table
Possible Cause
• Extension cord not connected to the
power plug
• Extension cord not connected to
power source
• The safety button or the trigger
switch is not fully engaged
• Dry, corroded blades
• Blades or blade support bent
• Bent or damaged teeth
• Loose blade bolts
Problem
• Unit does not run
• Slow running, noisy, or hot blades
Possible Solution
• Check extension cord is fully
connected to tool
• Check extension cord is fully
connected to a live receptacle
• Check safety button and trigger
switch is fully depressed
• Lubricate blades
• Straighten blade or blade support
• Straighten teeth
• Tighten blade bolts
11
19
19
19
SNOW JOE
®
+ SUN JOE
®
REFURBISHED GOODS WARRANTY
GENERAL CONDITIONS:
Snow Joe
®
+ Sun Joe
®
operating under Snow Joe
®
33*^HYYHU[Z
this refurbished product to the original purchaser for 90 days
against defects in material or workmanship when used for normal
residential purposes. If a replacement part or product is needed,
it will be sent free of charge to the original purchaser except as
noted below.
;OLK\YH[PVUVM[OPZ^HYYHU[`HWWSPLZVUS`PM[OLWYVK\J[PZW\[[V
personal use around the household. It is the owner’s responsibility
to correctly perform all maintenance and minor adjustments
explained in the owner’s manual.
HOW TO OBTAIN YOUR REPLACEMENT PART OR PRODUCT:
;V VI[HPU H YLWSHJLTLU[ WHY[ VY WYVK\J[ WSLHZL ]PZP[
snowjoe.com/help or email us at [email protected] for
instructions. Please be sure to register your unit beforehand to
speed up this process. Certain products may require a serial
U\TILY [`WPJHSS` MV\UK VU [OL KLJHS Hɉ_LK [V [OL OV\ZPUN
or guard of your product. All products require a valid proof
of purchase.
EXCLUSIONS:
>LHYPUN WHY[Z SPRL ILS[Z H\NLYZ JOHPUZ HUK [PULZ HYL
not covered under this warranty. Wearing parts can be
purchased at snowjoe.com or by calling 1-866-SNOWJOE
(1-866-766-9563).
)H[[LYPLZ HYL JV]LYLK PU M\SS MVY KH`Z MYVT [OL KH[L VM
purchase.
Snow Joe
®
+ Sun Joe
®
may from time to time change the design
of its products. Nothing contained in this warranty shall be
construed as obligating Snow Joe
®
+ Sun Joe
®
to incorporate
such design changes into previously manufactured products, nor
shall such changes be construed as an admission that previous
designs were defective.
;OPZ ^HYYHU[` PZ PU[LUKLK [V JV]LY WYVK\J[ KLMLJ[Z VUS`
Snow Joe
®
33* PZ UV[ SPHISL MVY PUKPYLJ[ PUJPKLU[HS VY
consequential damages in connection with the use or misuse of
the Snow Joe
®
+ Sun Joe
®
products covered by this warranty.
;OPZ ^HYYHU[` KVLZ UV[ JV]LY HU` JVZ[ VY L_WLUZL PUJ\YYLK
by the purchaser in providing substitute equipment or service
during reasonable periods of malfunction or non-use of this
product while waiting for a replacement part or unit under this
warranty. Some states do not allow exclusions of incidental or
consequential damages so the above exclusions may not apply
PU HSS Z[H[LZ ;OPZ ^HYYHU[` TH` NP]L `V\ ZWLJPÄJ SLNHS YPNO[Z PU
your state.
HOW TO REACH US:
>L»YLOLYL[VOLSW4VUKH`[OYV\NO-YPKH`MYVT (4[V74,:;
and Sunday 9AM to 4PM. You can reach us at 1-866-SNOWJOE
(
1-866-766-9563), online at snowjoe.com, via email at
[email protected] or tweet us @snowjoe.
EXPORTS:
Customers who have purchased Snow Joe
®
+ Sun Joe
®
products exported from the United States and Canada should
contact their Snow Joe
®
+ Sun Joe
®
distributor (dealer) to obtain
information applicable to your country, province or state. If for
HU` YLHZVU `V\ HYL UV[ ZH[PZÄLK ^P[O [OL KPZ[YPI\[VY»Z ZLY]PJL
VY PM `V\ OH]L KPɉJ\S[` VI[HPUPUN ^HYYHU[` PUMVYTH[PVU JVU[HJ[
your Snow Joe
®
+ Sun Joe
®
ZLSSLY0MPU[OLL]LU[`V\YLɈVY[ZHYL
unsatisfactory, please reach out to us directly.
snowjoe.com
