Loading ...
Loading ...
Loading ...
Connect water drain hose directly to water
drain hole or to the sink outlet spigot. This
connection should be minimum 50 cm and
maximum 110 cm from floor plane.
IMPORTANT: Items will not wash
properly if a drain hose longer than 4m
is used.
Connecting the Water Supply Hose to the
Magic Hose Joint
1. While pushing the sleeve on the female
coupler (section D in the figure) of the joint
down with your fingers, connect the
female coupler to the male coupler
(section C in the figure).
2. Release the sleeve, then push the
Water Supply Hose up into the Magic
Hose Joint until it clicks into place.
3. Pull the Water Supply Hose down to
make sure that it is securely attached.
2.4 Drain Hose
An Aqua stop water spout is available
with some models. Do not damage it or
allow it to become bent or twisted.
6
Loading ...
Loading ...
Loading ...