UH70110RM OWNER’S MANUAL

Loading ...

HEPA Filter: How to Clean

4.8

4.8 With fingers in slots, pull filter frame (A)

straight out. Hold filter over a trash receptacle

and tap out dirt and debris.

Slide back into position on vacuum.

HEPA Filter: What to Buy

When used and maintained properly, your HEPA Filter should never need

replacement. If desired, replacement filter is available. Ask for Hoover

Part

No.303172001.

How to Empty

4.3 Press dirt cup

release button (A) and

pivot cup out.

4.4 Hold dirt cup over

trash receptacle, push

dirt cup door release

lever (A) to open dirt

cup door (B).

Close dirt cup door (B).

Press firmly to secure

at front (C).

4.4

DIRT CUP

(continued)

4.5 Place bottom of dirt cup into vacuum body first. Pivot dirt cup into vacuum

body and press firmly until it locks into place.

4.6

To maintain optimal performance, filters should be

cleaned every two months under normal use.

Rinsable Filter: How to Clean

Remove dirt cup as described in Fig. 4.3.

4.6 Pull up on dirt cup latch (A) to open.

4.7 Pull on filter tab to remove Rinsable Filter.

Hold filter under running water for two minutes to

remove dirt and debris. Squeeze filter twice while

underwater. Squeeze a final time to remove

excess water.

When used and maintained properly, your Rinsable

Filter should never need replacement. If desired,

replacement filter is available. Ask for Hoover

Part No.303173001.

Rinsable Filter: What to Buy

FILTERS: When to Clean

4.7

CAUTION

! !

To reduce the risk of injury from moving parts,

unplug vacuum before servicing. Do not use

vacuum without dirt cup or filters in place.

IMPORTANT

Allow filter to dry completely before replacing.

Dry filter on edge so air circulates on both sides

of filter. This may take up to 24 hours.

Replace filter, tab side out.

Close lid securely by pushing at (B) until it clicks as

shown in Fig. 4.6.

Replace dirt cup as described in Fig 4.5.