Loading ...
Loading ...
Loading ...
User instructions
14
2. Operating instructions
Once the dishwasher has been correctly installed, prepare it for use as
follows:
Adjust the water softening system
Add salt
Add rinse aid and detergent
2.1 Using the water softening system
The dishwasher is equipped with an
automatic softening system which uses a
special regenerating salt to reduce the
hardness of the water, responsible for
whitish marks on dry dishes The
dishwasher is factory set for water
hardness level 3 (average hardness).
When using water of medium hardness, the salt container should be
refilled after approximately 20 wash cycles. The salt container can hold
approximately 1.5 kg of salt grains. Some models are equipped with a cap
with a no-salt optical indicator containing a green float which descends as
the salt concentration in the water drops. When the green float can no
longer be seen through the transparent cap, salt must be added. The
container is situated at the bottom of the dishwasher. After removing the
lower basket, unscrew the salt container cap by turning it anticlockwise
and pour in the salt using the funnel supplied. Before replacing the cap,
remove any salt residues from around the opening.
When using the dishwasher for the first time, in addition to the salt
it is also necessary to add one litre of water to the container.
Each time the salt container is refilled, make sure that the cap is
securely closed. The mixture of water and detergent must never
enter the salt container, as this would compromise the operation of
the regeneration system. In the event of this occurring, the warranty
will be invalidated.
Only use salt specially formulated for domestic dishwashers. If
using salt tablets, do not fill the container completely.
SALT
Loading ...
Loading ...
Loading ...