Loading ...
Loading ...
Loading ...
5
OPERATION
CONTROL PANEL
The control panel is located inside the right door on the front panel.
Main Power
On/Off
Press ON. Power turns ON. All functions are
enabled.
Press OFF. Power, flame effect, and all functions
turn off.
Flame Adjustment
Turn the dimmer dial clockwise or counter
clockwise to get the desired flame intensity. The
function will only operate when the main power
switch is ON.
Temperature
Control
The heat output is controlled by the
Thermostat Control dial. Set the Thermostat
Control dial clockwise to the maximum
position initially. When the room reaches the
desired temperature, reduce the setting by
slowly turning the thermostat dial counter
clockwise until the heater will click and turn
off. The heater will then maintain the room
temperature at the desired level.
When the heat function is used for the first time, a slight odor may
be present. This is normal and should not occur again unless the
heater is not used for an extended period of time.
Loading ...
Loading ...