Loading ...
Loading ...
Loading ...
4 ENGLISH
INSTALLATION
PaperShredder
OperatingInstructions
Installation
Operation
Maintenance
Troubleshooting
Service Center
Limited Warranty
*ONEFOLDEDSHEETOFPAPEREQUATESTO2SHEETSOFPAPER
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
Sheet Capacity
Paper Shred Size
Paper Entry Width
Credit Card Capacity
Duty Cycle
Voltage
10 sheets of 20lb bond paper*
5/32 in. x 15/32 in. pieces
0.2 cm x 1.2 cm pieces
8.66 in. / 220 mm
1 at a time
60 min. on / 45 min. off
120V~60Hz / 3.5 A
1. Make sure the basket door is securely closed shut. This shredder features a safety power cut off and
will not operate if door is open. Shredders with pull-out wastebaskets feature a safety power cut off
upon bin removal. The supplied wastebasket activates this switch, which allows the shredder to be
operable. (FIGURE 1)
2. A socket-outlet should be near the equipment and be easily accessible.
3. Connect the power cord to any standard 120 volt AC outlet.
Micro-cut shredders have very sharp exposed blades on the underside.
!
Caution:
FIGURE1
OPERATION
Loading ...
Loading ...
Loading ...