Loading ...
Loading ...
Loading ...
7.2 INSTALL THE LOWER HANDLE
4
8
8
1. Insert the lower handle (4) into the frame holes.
2. Put the bolts (8) through the holes and tighten with a
screwdriver.
WARNING
Do not make damage to the cables when you install the
handle.
7.3 INSTALL THE UPPER HANDLE
22
3
22
9
9
4
1. Align the holes in the upper (3) handle and the lower
handle (4).
2. Put the bolts (9) through the holes.
3. Tighten the knobs (22) onto the bolts.
4. Do the same operation on the other side.
7.4 INSTALL THE GRASS CATCHER
10
12
11
13
5
7
1. Put the four screws (13) into the washers (12) to attach
the bracket (11).
2. Move the bracket into the groove.
3. Align the latches and the slots of the top and lower halves
of the grass catcher and push the two halves together to
interlock.
4. Push the latch of the handle (10) into the grass catcher.
5. Open the rear discharge door (5) and hold it.
6. Hold the the grass catcher (7) by its handle and put the
hooks over the slots.
7. Close the rear discharge door.
7.5 SET THE CUTTING HEIGHT
The machine can be set to different blade heights.
9
English
EN
Loading ...
Loading ...
Loading ...