Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2 OVERVIEW
Figure 1 - 16.
1
Lock-out button
2
Trigger
3
Front handle
4
Upper shaft
5
Lower shaft
6
Cut-off blade
7
Trimmer head
8
Guard
9
Rotating handle latches
10
Positioning holes
11
Spool retainer button
12
Spool cover
13
Tab
14
Spool
15
Hole
16
Spool housing
17
Anchor hole
18
Guide slot
19
Battery release button
A
Direction of roatation
B
Best cutting area
C
Dangerous cutting area
2 SAFETY
WARNING
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
WARNING
Remove the battery pack from the machine before
installation.
WARNING
Do not use accessories that are not recommended for this
machine.
3.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.2 ATTACH THE GUARD
Figure 2 - 3.
WARNING
Do not touch the cut-off blade.
1. Remove the screw from the trimmer head with a Phillips
head screwdriver (not included).
2. Put the guard onto the trimmer head.
3. Align the screw hole on the guard with the screw hole on
the trimmer head.
4. Tighten the screw.
3.3 ASSEMBLE THE SHAFT
Figure 4.
1. Push in the rotating handle latches on the lower shaft.
2. Align the latches with the positioning holes and slide the
two shafts.
3. Turn the lower shaft until the latches locks into the
positioning holes.
4. Insert the screws into the shaft.
5. Tighten the screws.
3.4 INSTALL THE BATTERY PACK
Figure 5.
4
English
EN
Loading ...
Loading ...
Loading ...