Loading ...
Loading ...
Loading ...
10
8. INSTALL THE ADAPTER AND THE TRANSITION (IF NEED BE)
(INTERNAL BLOWER HOOD ONLY)
HJ0013
Using standard 3/8" screws provided, secure the
adapter to the top (or back) of the hood (2 screws
for a 3¼" x 10" adapter/damper and 4 screws for
a 4½" x 18½" adapter). Seal the adapter to the
hood using metal foil duct tape. For round ducting,
install an appropriate sized transition and seal
the joints with metal foil duct tape.
7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) ONLY) (CONT'D)
Slide the blower to disengage its flange from the retaining bracket.
HD0270
HD0271
LEFT SIDE
MOUNTING
SCREW
LOCATION
HD0272
RIGHT SIDE
MOUNTING
SCREW
LOCATION
Flip the blower and engage its flange in the
back wall retaining bracket.
Using a 5/16" socket and the screws previously
removed, secure the blower to the hood.
Plug the blower in.
NOTE FOR DUAL BLOWER HOOD ONLY: Cut off the plastic tie wrap on left motor cable.
HE0085
9. INSTALL ANKE60 RECIRCULATION KIT (NON DUCTED INSTALLATION ONLY)
Refer to the installation sheet included with the recirculation kit for details.
Loading ...
Loading ...
Loading ...