Loading ...
Loading ...
Loading ...
24
©
2018 DJI All Rights Reserved.
Mavic Air
User Manual
Group Sele
Make three or more V gestures at the same time. Once your group sele
gesture has been recognized a two-second countdown will begin, after
which the aircraft will take the rst of three photos. During the countdown
the Front LEDs will blink red slowly for one second and blink red quickly
for one second. The Front LEDs will then turn o and the aircraft will take a
photo at its current position.
Next, the aircraft will fly to a point approximately 16 ft (5 m) away from your
group and ascend and take a photo at a 30° angle. The aircraft will then y to
a point approximately 23 ft (7 m) away from your group and ascend and take a
photo at a 15°. Finally, the aircraft will y back to its original position. The Front
LEDs will blink red twice when the aircraft is taking the second and third photos.
Record Videos
Make a frame gesture with your ngers (ensuring at least one hand is above
your nose). Once your frame gesture has been recognized the aircraft’s
Front LEDs will turn off and the camera will start recording. After five
seconds or more have elapsed, making the frame gesture again will stop
the recording.
Front LEDs O
Switching Control
Drop your hand towards the oor. The Front LEDs will turn solid green.
The person who would like to control the aircraft should raise their palm in
front of the aircraft. Once the aircraft is under their control the Front LEDs
will blink green slowly.
Front LEDs blink green slowly
GestureLand
Move your palm down slowly to make the aircraft descend. Continue until
it has descended to its minimum altitude, then continue commanding it to
descend for a further three seconds and it will land automatically and its
motors will stop.
Front LEDs blink green slowly
Exiting SmartCapture
Tap on the screen, press the Flight Pause button on the remote controller, or toggle the Flight Mode
switch to S-mode on the remote controller to exit SmartCapture. If you are using SmartCapture without
the remote controller or the DJI GO 4 app, land the aircraft using GestureLand and power the aircraft o
to exit SmartCapture.
Loading ...
Loading ...
Loading ...