Loading ...
Loading ...
Loading ...
23
EN
TROUBLESHOOTING
Problem Possible cause Solution
Appliance does not work. Mains plug is not plugged
in or is loose
Insert mains plug.
Fuse has blown or is
defective
Check fuse, replace if
necessary.
The food is too warm. Temperature is not properly
adjusted.
Please look in the initial
Temperature Setting
section.
Door was open for an
extended period.
Open the door only as
long as necessary.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
Turn the temperature
regulation to a colder
setting temporarily.
The appliance is near a
heat source.
Please look in the
installation location section.
Appliance cools too much. Temperature is set too cold. Turn the temperature
regulation knob to a
warmer setting temporarily.
Unusual noises. Appliance is not level. Re-adjust the feet.
The appliance is touching
the wall or other objects.
Move the appliance
slightly.
A component, e.g. a
pipe, on the rear of the
appliance is touching
another part of the
appliance or the wall.
If necessary, carefully bend
the component out of the
way.
CLEANING AND CARE
• Do not use chemical cleaners, abrasives or solvents for cleaning.
• Switch off the refrigerator by turning down the temperature control knob and pulling
the plug out of the stretch socket.
• Wipe the inside and outside of the refrigerator with a damp cloth and a little
detergent, wipe with clear water and then dry.
• Clean the storage compartments, accessories and gasket in warm soapy water,
rinse them clean and then dry them thoroughly.
• Clean the door seals with warm soapy water.
• Replace all parts, plug in the plug and turn the thermostat to the desired
temperature.
Loading ...
Loading ...
Loading ...