Loading ...
Loading ...
Loading ...
Insert form pad
The interior assembly comes with the
pre-installed wired door sensor setup for a
right swing doors with 2 ¾" (70mm) backset*.
7ULPH[FHVVSDUW3IRUGRRUVZLWKɍ
(60mm) backset as shown below.
For left swing doors, re-route the door
sensor wire through the side channel.
Pull the foam pad then re-insert to secure
the wire. Discard the excess part (e) for
GRRUVZLWKɍPPEDFNVHWDV
shown below:
*Backset = distance of the door edge to the center of the cross-bore door hole.
DO NOT INSTALL THE SENSORS YET
Pull foam pad
PREPARING DOOR SENSORS FOR INSTALLATION
(P)
10
Step 4
continued
Trim excess here for
ɍPPEDFNVHW
3
2
1
Loading ...
Loading ...
Loading ...