Loading ...
Loading ...
Loading ...
33English
1. Remove the lid of the milk frother.
2. Insert the desired aachment (srrer or frother).
3. Pour milk into the container. Ensure that you do not exceed the maximum
level: Frothing 175 ml (" ";) Srring 250ml (" ").
4. Close the lid of the milk container and ensure that it is xed correctly.
5. Place the milk container on the base unit. Connect the power cable to a
properly installed socket.
6. Press the sensor buon (" ") on the front of the base unit of the milk
frother to switch on the appliance.
Press the sensor buon "ON/OFF" on the front of the base unit to select the desi-
red mode. An audible signal conrms the selecon. And the ( ) symbol starts
glowing in red on the buon (heang plate switched on). If the ( ) symbol is
blue, then the heang plate is switched o and the content is not being heated.
If the appliance is started, then the milk frother is automacally switched o aer
60-240 seconds. The container is subsequently lled with hot or cold milk froth de-
pending on whether you had switched the heang plate on or o ("red" or "blue"
mode). If you want to switch o or stop the appliance during operaon, press the
sensor buon (" ") once again.
Loading ...
Loading ...
Loading ...