Loading ...
Loading ...
Loading ...
6
Toasting Cycles
TOAST / CANCEL Button
1. Make sure the sliding crumb tray is locked in position at the back of the Toaster and the toasting
lever is in the UP position.
2. Make sure no bread or other objects are inside the toasting slots. Place Toaster on a at, level, heat
resistant surface.
3. Plug the power cord into a 120V AC electrical outlet.
4. Position the browning selector lever to desired setting. To test toasting times for browning, it is
best to use both toasting slots; position the browning selector lever between (3) and (4) medium;
then adjust each subsequent toasting to your preference.
5. Remove all protective wrappings from toaster food before placing into the toasting slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that may get lodged in
toasting slot(s).
6. ANTI-JAM Feature. If any toast or toaster food gets jammed, the Toaster will shut OFF
automatically. Unplug the Toaster immediately and allow Toaster to cool down. Following the
procedures outlined in the section entitled “Removing Lodged Foods,” clear the jam.
7. Insert bread or toaster food into the toasting slot(s). Lower the toasting lever until locked into place.
Automatic centering guides close to hold food upright for uniform side-to-side toasting. When the
bread is lowered into position, the CANCEL button will illuminate and toasting will begin as the
remaining TIME appears on the digital display.
NOTE: The toasting lever will not lock in position unless the Toaster is plugged into a 120V AC
electrical outlet.
NOTE: When toasting a single slice of bread or any toaster food, food may be placed in any toasting
slot.
NOTE: To prevent a re hazard, never place bread or toaster food over the top of the toasting slots;
always place bread into the slots.
NOTE: DO NOT change the browning selector lever selection during the toasting cycle. First press
the CANCEL button; then slide the browning selector lever to adjust the browning level. Lower the
toasting lever and continue toasting.
8. When the toasting TIME displays 0:00, toast or toaster food will rise automatically. Use the high-lift
lever to make it easier to remove smaller toasted items. Push the toasting lever manually UP to the
top of the toasting slot and carefully remove toasted food. Use care as both the food and the top of
the Toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage
the heating element or cause injury.
9. Unplug cord from wall outlet when not in use.
CANCEL Button
1. When the toasting lever is lowered, the CANCEL button will illuminate. Toasting will begin as the
remaining TIME appears on the digital display.
2. To stop or interrupt any toasting cycle, press the CANCEL button. Bread or toaster food will
automatically rise; the Toaster will turn OFF.
3. Unplug cord from wall outlet when not in use.
BAGEL Button
The BAGEL setting works great for English mufns, too!
1. Place one half in each toasting slot with the cut sides facing the center.
2. Slide the browning selector lever to desired setting.
3. Press the toasting lever down. The CANCEL button will illuminate.
4. Press the BAGEL button. The BAGEL button will illuminate. BAGEL toasting will begin as the
remaining TIME appears on the digital display.
5. When the toasting TIME displays 0:00, the toasted bagel will rise automatically. Use care as the
bagel and the top of the Toaster will still be hot.
6. To stop or interrupt the BAGEL cycle, press the CANCEL button. The toasted bagel will
automatically rise; the Toaster will turn OFF.
7. Unplug cord from wall outlet when not in use.
FROZEN Button
When toasting frozen bread or toaster food, use the FROZEN cycle to adjust time for perfect browning.
1. Place frozen bread or toaster food into 1 or both toasting slots.
SO-314483_14621_BELLA_Elite 2 slice digital toaster_Kohls_IM_R0.indd 6 2017-06-22 11:45 AM
Loading ...
Loading ...
Loading ...