Documents: Go to download!
User Manual
- User Manual - (English)
- Brochure - (English)
- Quick Setup
- Connecting the Loudspeakers
- Burn-in
- Room Acoustics
- Positioning
- Enclosed CD
- Care of loudspeakers
- Service
- Warranty
Table of contents
Owner 's Manual for Marten HERITAGE BIRD 2
Table of contents
Quick Setup
Your Bird loudspeakers need quite a bit of playing time in order to reach their maximum performance. The use of the burn-in CD enclosed with the Bird loudspeakers is recommended to speed up this process. Follow these steps:
1. Connect the loudspeakers to your system.
2. Put the CD in your CD player.
3. Choose track 1 and set it on repeat
4. Set the volume to a moderate level The CD should be played for a minimum of 24 hours before attempting to adjust the loudspeaker placement. For more in-depth information about this process, please refer to the section about burn-in.
Connecting the Loudspeakers
To make the most of your Bird loudspeakers, please consider the following suggestions:
Choice of cable
The impact loudspeaker cables can have on the sound is dramatic. Be sure to use the same brand, type, and length of cable on each channel. Mixing different types and/or lengths of cable can upset the precise timing and balance of your loudspeaker.
Connections
At the back of your Bird, you will find four pairs of heavy duty terminals that will accept any standard connection. Whatever type of connection you use, make sure that the contact is tight, and has a proper contact area. Tighten the posts, and then retighten after a few days to make sure that the connections haven’t loosened.
Always turn off the power of your entire system before making connections to your speakers. We recommend using an amplifier with sufficient power (typically a minimum of 30 watts).
In order to obtain the best localization of instruments and voices, as well as the deepest, most natural bass, it is important to connect your loudspeakers in phase (which means that the drivers are moving in and out in the same direction and at the same time). The connectors on the speakers are clearly marked, and those on your amplifier and speakers cables should be also be marked. Keep all markings consistent in order to ensure in-phase connections.
Burn-in
The higher the quality of a loudspeaker system, the more demanding it will be regarding burn-in time. Your newly unpacked Bird loudspeakers need quite a bit of playing time to reach their optimum performance capability.
We have enclosed a CD to help speed up this process. Please allow the CD to be run for a minimum of 24 hours before attempting to adjust the placement of the loudspeakers in your listening room. Due to the high-tech materials used in the drivers, the Bird will sound a bit harsh in the beginning, but after 50 hours of playing your loudspeakers will sound good.
After about 200 hours of playing, your system will be optimized. The sound will be more open and detailed, and display more natural musical warmth.
Compare the process to that of a fine musical instrument, which has to be played for a period of time before reaching its full musical potential.
Room Acoustics
A good listening room has just the right amount of reflection and absorption. The performance of any loudspeaker depends upon the speaker’s location in the room and the acoustical conditions in that part of the room. Furnishings, size, and proportions all effect tonal balance, imaging, and bass characteristics.
To test the sonic balance of your room, stand in the location where the speakers will be installed and clap your hands two or three times. If the room is reverberant, you will hear a sharpness or echo. If the room is dull, the sound of the clap will decay rapidly and there will be little or no echo.
Large areas of glass, mirrors, or wood panelling will reflect sound waves and often result in brittleness and extreme brightness. You can correct this by breaking up these sound waves with softer surfaces like draperies or wall hangings. Try to create random reflections. Put a lot of time into the placement of the speakers. Experimenting with this will be well worth the effort.
Positioning
Every room is shaped and decorated differently, and is therefore presents unique requirements for the positioning of loudspeakers. Your loudspeakers will function at their best when placed on a flat, stable surface.
Loudspeaker Placement
The space between the loudspeakers should be free. Ideally, the space should be symmetrical in the area around the loudspeakers. We recommend experimenting with the placement of your loudspeakers in order to obtain the best balance, openness, and perception of depth.
Distance to back and side walls
One of the things that make Marten loudspeakers different is that they have been designed to stand relatively close to the back wall of your listening room. Other manufacturers usually recommend that their speakers be free-standing in the room to avoid reflection from the back wall. However, for good results, the Bird should be no closer than 40 cm (15.7 Inch) from the rear wall. Marten loudspeaker should not be placed close to a side wall, as reflections from these can disturb the depth of the sound image.
Focusing the Loudspeakers
Due to their highly advanced technology, the Bird loudspeakers will deliver excellent imaging, even at a relatively close listening distance. The distance ultimately depends on the room’s shape, size, and your listening taste. Please use track 2 of the enclosed CD as a guide to focusing the sound image.
The goal is to have balanced sound. Ideally, you should be able to place the recorded voice in the middle of your speaker arrangement. Ultimately, the shape, size, and furniture in the listening room all influence the end result, so take some extra time to experiment with the position of the loudspeakers.
Toe-in
The loudspeakers should normally be toed in toward the listening area to focus the sound. The amount of toe-in will depend upon your listening preferences and the room environment and dimensions
Bass-adjustment
On the back of each Bird loudspeaker, you will find a knob that will allow you to adjust the bass by 1 dB in three steps. Rotating the knob clockwise will increase the sensitivity, and rotating it anti-clockwise will decrease the sensitivity. Experiment with this until you are satisfied
Enclosed CD
1. Burn in Sweep
2. Focusing the Loudspeakers
Track 2 taken from the CD – “Feathers” with Jeanette Lindström & Steve Dobrogosz. © 200, PROPHONE RECORDS AB
Care of loudspeakers
Marten loudspeakers require no special treatment apart from the kind of handling you would apply to any high-tech product in your home.
Because many different materials are used in the making of the loudspeakers, all-in one cleaning materials should not be used. Never apply abrasive/ aggressive cleaning fluids to the outside of the unit.
The cabinet and other parts should only be cleaned with a soft, dry or slightly damp cloth.
Service
Do not attempt to open the unit’s case. Refer all servicing to qualified service personnel.
In the event your Bird loudspeakers need to be serviced, please contact your dealer, who will decide whether the problem can be remedied locally, or whether to contact Marten for service.
Warranty
Marten provides a transferable, limited manufacturer’s warranty. This warranty covers faults or defects in material or production only. Damage caused by abuse or misuse, or by the use of defective electronics, is not covered by warranty.
Please contact your local Marten dealer for more information about this warranty
Warranty Exclusions
Transportation damage, visible or hidden. Damage should be reported immediately to the transport company. Registration of the complaint should be sent to the Marten distributor.
Scratches in paint, wood, metal, or carbon surfaces. Complaints should be made to the dealer within three days after the sale.
Damage due to illicit handling and inappropriate use.
Transportation costs to service station or factory.
Damage through unauthorized repair and/or modification.
Subsequent damage to other appliances.
Refund of costs in case of unauthorized repair.
Malfunction caused by use for commercial or professional purposes.
All claims on Marten products obtained through unauthorized sources, with or without correct serial numbers.
See other models: OSCAR DUO OSCAR TRIO MINGUS QUINTET MINGUS TWENTY MINGUS ORCHESTRA
