1. Home
  2. Dji
  3. Dji E800 User Manual
  4. Page 7

Dji E800 Multirotor Propulsion System

User Manual - Page 7

For E800.

PDF File Manual, 9 pages, Read Online | Download pdf file

E800 photo
Loading ...
Loading ...
Loading ...
©
2015 DJI. All Rights Reserved.
7
DJI E800
Multirotor Propulsion System
8. ESC LED Indicators & Sound Description
The description is the same for both outer ESC LED indicators and inner ESC LED indicators, as
shown below:
Unplug any other serial devices connected to your computer before updating. Then follow the
instructions below:
1) Download the ESC Assistant installer from the DJI website. Run the installer and follow the
prompts to nish the installation.
2) Connect one end of the Updater to the Data/ESC Firmware Update Port. Connect the other end
of the Updater to a computer with a Micro-USB cable. Power on the ESC. DO NOT disconnect
until conguration is nished.
3) Run the ESC Assistant and wait for the ESC to connect. Watch the indicators on the bottom of
the screen. When connected successfully, the Computer Connection status will be solid green
and Data Exchange Indicator will blink blue.
4) Click on the [View] page. In the “ESC” section, check the current rmware version and ensure
the installed rmware is the latest version. If not, click the link and follow the prompts to upgrade.
5) The color of the ESC LED indicators, the type of propeller, etc. can also be adjusted through the
DJI ESC Assistant.
If the ESC is not automatically recognized by the DJI ESC Assistant (the indicators on
the bottom of the screen show a solid green and an inactive blue), check whether there
is more than one DJI Updater, FTDI USB adapter, or other developer tool (including, but
not limited to, BeagleBone, Raspberry, Arduino, etc.), which may use the FTDI chipset,
connected to the computer. If any of these FTDI devices are connected, simply unplug
them and keep the DJI Updater connected to the computer. Then, restart the DJI ESC
Assistant and the ESC system to form a successful connection.
Ensure your ESC rmware matches the motor you will attach it to. Refer to the tag on back
of the ESC to see the default rmware version.
Mount the outer ESC LED indicators according to your needs.
The Data/ESC Firmware Update Port is used to update the ESC rmware
and adjust the ESC. To do this, visit the ofcial DJI website to download
the DJI ESC Assistant.
http://www.dji.com/product/e800/download
7. Updating Your ESCs
ESC Updater Computer
Loading ...
Loading ...