Loading ...
Warning
Sense is connected to dangerous voltages.
Improper use or installation can be dangerous
or even fatal. Please make sure to follow
these guidelines:
1. The installation should be conducted by
a qualied professional, according to local
electrical codes.
2. Personal protective equipment should be
worn when installing a current sensor on a
conductor exposing hazardous live voltages.
If the current sensors are used in a manner
other than specied, the safety protection
provided may be impaired.
3. Do not try to open the Sense monitor,
touch any internal parts, or try to repair it.
4. If you believe the monitor, sensors, or
cables may have been damaged, do not try
to use them.
5. Use the Sense monitor only in the United
States and Canada, and only with a 60Hz
120V/240V split phase system.
6. Install the Sense monitor where it will not
be exposed to direct sunlight or extremely
low or high temperatures. No exposure to
water. RH < 90%; Elevation < 3000 meters;
Temperature 0 - 50°C.
Legal
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
Operation is subject to these conditions:
1. It may not cause harmful interference.
2. It must accept any interference received,
including interference that may cause
undesired operation. If it is not installed and
used as per the instructions, it may cause
interference which is harmful to wireless
communications. There is no guarantee that
interference will not occur in a particular
installation. If it does cause interference we
recommend: reorienting or relocating the
receiving antenna, or increasing the separation
between the device and the receiver.
3. Patents: sense.com/patents
Questions?
Contact help.sense.com.
Designed by Sense in Cambridge, MA
©2018 Sense Labs, Inc.
USC
Certied to CSA STD C22.2 No. 61010-1
Conforms to UL STD 61010-1
Conforms to UL STD 61010-2-032
Conforms to CAN ICES-3(B)/NMB-3(B)
Loading ...
Loading ...
Loading ...