Loading ...
Loading ...
Loading ...
25
CARE AND CLEANING
Cleaning and Maintaining Dispensing System
The dispensing system needs to be cleaned between
usage to prevent spoilage and/or foul taste in your beer.
Keg Coupler Cleaning
Remove the keg coupler from the keg if necessary. Close
and brush the keg coupler in hot water or a sanitizing solu-
tion. Rinse thoroughly with clean water. Dry all parts and
reassemble.
Faucet Cleaning
-
cet to relieve the pressure. To remove the faucet from the
tower use the spanner wrench provided. Place the pin on
the wrench into the hole on the faucet collar and turn clock-
wise P
Remove the knurled cap from the faucet body just below
the handle and pull the handle assembly from the faucet.
This will allow the shaft to be removed from the back of the
faucet, see Figure 53.
Hose clamps can be
released by a lateral
movement to the head.
Figure 50
Figure 51
Place pin on
wrench into hole
in faucet collar.
Figure 52
Unscrew knurled
cap on faucet body
and remove handle
assembly
After removing the
handle the shaft will
slide out the back of the
faucet
Figure 53
Soak all faucet parts in hot clear water or a solution of hot
water and a sanitizing solution. Do not use soap. Rinse
thoroughly with clean water.
Reassemble faucet, assemble faucet to tower (be sure
Loading ...
Loading ...
Loading ...