Loading ...
Loading ...
Loading ...
7
mWARNING! The line on the mower body must be aligned
with one of the lines on the lower handle. And, the same line
must be used for both sides of the unit.
3. Place the upper handle over the upper ends of the lower
handle. Align the holes. Use the two sets of upper handle
knobs and bolts to secure (Fig. 4).
4. Secure the power cable to the lawn mower using the two
cord clips (Fig. 5).
Grass Collection Bag Assembly + Fitting
1. Clip the protective plastic straps onto the support rod of
the grass collection bag (Fig. 6 and Fig. 7).
2. Lift the ejector ap with one hand. With the other hand,
hold the grass collection bag by the handle and hook it in
from above (Fig. 8).
Operation
This lawn mower is intended for private residential use to cut
grass in small lawns and gardens. This lawn mower is not
intended to cut grass in public parks, playing elds, farms, or
forests. Do not use this lawn mower for any application other
than that for which it is intended.
Adjusting the Cutting Height
This electric lawn mower is equipped with a 6-position height
adjustment lever to tailor grass cutting heights from
1.2 in. to 3.3 in. (30 mm to 85 mm). To change the cutting
height of the grass, follow the instructions below.
mWARNING! Before making these adjustments,
disconnect the power supply to the lawn mower and wait until
the rotating blade has come to a complete standstill. Wearing
gloves is recommended due to the close proximity of the
cutting blade.
ALWAYS FOLLOW ALL SAFETY PRECAUTIONS AND
RECOMMENDATIONS LISTED PREVIOUSLY IN THIS
MANUAL.
1. Power o and unplug the lawn mower.
2. Push the cutting height adjustment lever to the outside of
the original slot (Fig. 9).
Fig. 4
Upper handle
Bolt
Lower handle
Upper handle knob
Fig. 5
Cord clip
Cord clip
Power cable
Fig. 6
Protective
plastic straps
Support rod
R
Fig. 7
Protective
plastic straps
Support rod
R
Fig. 8
Ejector
ap
Grass collection bag
Loading ...
Loading ...
Loading ...