Installation and Operation Instructions
ELECTRIC FIREPLACE
CAM30WMEF
Maintenance
Troubleshooting
Important Safety Instructions
Listing Approvals
Product Dimensions
Locating Fireplace
Unpacking and Testing Fireplace
Replacing The Rock/Log Set And Light Bulbs
Grounding Instructions
Installation
Finishing Ckecklist
Operating Instructions
4-6
7
8
9
10
10
11-12
13
13-14
15
16
17
2
.
SA1965
A
6
.
7
.
SAVE THESE INSTRUCTIONS!
110-120V AC, 60Hz
MAX 1400W
30.6
19.2
5.7
X30WMEF
2
6
5.7
3
The manual controls are located on the left side of the fireplace.
:slortnoc gniwollof eht evah uoY
1. Power ON
/OFF: Power to the unit
2. Flame brightness controls: Allows you to adjust
the flame to suit your mood.Press
to
increase flame brightness and
to decrease
flame brightness.You must press the button
Several times to see the full flame effect.
3. Low heat:700 watts
4
. High heat: 1400 watts
Please note: The heater touchpanel control must be
touched 2 times to achieve high heat.
5. Hea
ter Timer:
1.
2.
3.
4.
5.
6.
7.
Replacing The Rock/Log Set And Light Bulbs
T
O CHANGE LOG/ROCK SET (NOTE: MAKE SURE FIREPLACE IS TURNED OFF AND HAS BEEN UNPLUGGE
D
F
ROM ELECTRICAL OUTLET BEFORE ATTEMPTING TO CHANGE THE LOG/ROCK SET):
1
. Place fireplace on a flat, level surface (FIG 1).
2
. Remove 3 screws located on each side of glass face of fireplace (FIG 2 and FIG 3).
3
. Remove screws that aach the log/rock set to the front of fireplace (FIG 4).
4
. Replace with the desired set（log/rock）and re-assemble new set by inserng and ghtenin
g
screws(FIG 5).
5
. Re-assemble glass face to fireplace by inserng and ghtening screws on both side of glas
s
face (FIG 6).
FIG 1
FIG 4 FIG 5 FIG 6
FIG 2 FIG 3
The remote takes 2 xAAA
batteries
