Loading ...
Loading ...
Loading ...
1. Bring vehicle to a full stop.
2. Check the brakes to ensure the brake lever is not stuck and the brake
holding latch is unlocked.
3. Once brakes are disengaged, the message will clear and the fault will be
saved in the historic code.
AUTOMATIC TRANSMISSION GEAR SELECTOR
The transmission gear selector is located on the right side of the vehicle. To shift
gears, brake to a complete stop. When the engine is idling, move the lever to the
desired gear.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
NOTE
Shifting gears with the engine speed above idle or while the vehicle is moving
could cause transmission damage.
Whenever the ATV is left unattended, always place the transmission in PARK
and lock the parking brake.
TIP
To extend belt life, use low forward gear when pulling a heavy load at less than
seven miles per hour for extended periods and when operating uphill at a slow
speed.
43
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...