Loading ...
Loading ...
Loading ...
15
Activating the appliance
Standby
The appliance is in the standby mode when no
function is set or the child lock is activated.
The control panel's brightness is reduced in the
standby mode.
Notes
‒ There are various displays for the standby mode.
The GAGGENAU logo and the time are set by
default. Refer to the section entitled Factory
setting
if you would like to change the display.
‒ The display's brightness depends on the vertical
viewing angle. You can adjust the display by way
of the "Brightness" setting in the factory settings.
Activate appliance
In order to exit standby mode, you can either
▯ Set the function selector,
▯ Touch a control panel,
▯ or open or close the door.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Notes
‒ If "Standby display = off" is selected in the factory
setting, you must turn the function selector to exit
the standby mode.
‒ The standby display appears again if you have not
made any settings for a long while after activation.
‒ The cooking compartment lighting goes out after
a little while if the door is open.
Operating the appliance
Oven interior
The oven interior has four insertion levels. These are
counted from the bottom up.
9 CAUTION
Do not place anything on the cooking
compartment floor. Do not cover it with
aluminium foil. A build-up of heat could damage
the appliance or cause injury.
9 CAUTION
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The accessories feature a latching function. The
latching function prevents tilting of accessories when
pulling them out. You must insert accessories in the
oven interior correctly so that tilt protection will work.
When inserting the rack, make sure
▯ that the engaging lug (a) points downward
▯ that the rack's safety clip is at the rear and top.
D
D
Loading ...
Loading ...
Loading ...