G-Shock MTGB2000BDE-1 Limited Edition Black IP Connected Carbon Guard, Multi Band Watch

User Manual - Page 16

For MTGB2000BDE-1.

PDF File Manual, 23 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted when battery power is
low.
3
0
Setting the Timer Start Time
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
first click.
3. Rotate the crown to change the
countdown start time setting.
The countdown start time can be set in
1-minute units up to 24 hours.
30
Seconds
Minutes
Hours 24-hour
4. Push the crown back in and then lock it.
Note
To specify a countdown start time of 24
hours, align the small hour and minute
hands with 12 o’clock, so the small 24-
hour hand aligns with 24.
You can also use G-SHOCK
Connected to configure timer settings.
Using the Timer
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Press (D) to start the countdown.
30
Seconds
Minutes
Hours 24-hour
A beeper sounds for 10 seconds when the
end of the countdown is reached.
To pause an ongoing countdown, press
(D). To reset a paused countdown to the
start time, press (A).
3. Press any button to stop the tone.
Alarm
The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
below.
ー 
When battery power is low
ー 
While the watch is at Level 3 power
saving
l
Power Saving
3
0
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out to the
first click.
This turns on the alarm.
3. Rotate the crown to change the alarm time
setting.
30
Crown
MinuteHour
Alarm on
4. Push the crown back in and then lock it.
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
You can also use G-SHOCK
Connected to configure alarm time
settings.
Turning Off the Alarm
To stop the alarm from sounding, perform the
steps below to turn it off.
To have the alarm sound again, turn it on.
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to move the second hand to
OFF.
Each press of (D) toggles between ON
and OFF.
30
Alarm on
Alarm off
Watch Operation Guide 5636
16
Loading ...
Loading ...
Loading ...