Loading ...
Loading ...
Loading ...
10
4.6 Move out the unit and fasten the screws for the fixing brackets.
4.7 Connect to electric service. Reference to Secon Electrical Connection.
4.8 Insert firebox into opening. Ensure that it is centered left to right, level with shims if necessary. Fix
the
fireplace on the side wood stud by the screws (ST4X40 4 pcs ). Make sure the front face of the
firebox is not lower than the surface of the finishing wall.
4.9 Set the fuel bed. Reference to Section Fuel Bed Setting.
4.10Install the glass.
CAUTION! The next step requires installation of a GLASS panel! The manufacturer
recommends that two adults install the glass panel. Always use extreme caution when
handling glass. Failure to do so could result in personal injury or property damage.
Note: The glass panel should be placed in a safe place to avoid damaging before placing the fuel effect.
Carefully set both hooks of the front glass panel onto the firebox. NOTE: Make sure the glass is
properly installed according to the direction and steps below, and fully aached to the firebox so
that the control panel can work properly. Fix the glass front by 2pcs screws (ST3x8) and complete the
installation.
Loading ...
Loading ...
Loading ...