Sun Joe TJW24C - 24-Volt Cordless Telescoping Weeder/Cultivator Kit

Operator’s manual - Page 12

For TJW24C.

PDF File Manual, 60 pages, Read Online | Download pdf file

TJW24C photo
Loading ...
Loading ...
Loading ...
12
mWARNING! Do not place hands, feet, or any other part
of the body or clothing near the rotating blade or any other
moving part. The blade begin to rotate forward once the On/O
switch is depressed. The blade continue to rotate until the
On/O switch is released. Failure to avoid contact with the
rotating blade could cause serious personal injury.
Do not try to till too deeply or force the product into soil that
is extremely hard or resistant.
Walk the product through the soil at a normal pace and in
as straight a line as possible.
Till in slightly overlapping rows. To till most eectively,
follow the pattern indicated in Fig. 11. Start by moving the
cultivator + weeder up and down in vertical lines, then work
horizontally from left to right. This will keep the rows even
and ensure that all the ground is tilled without missing any
spots.
Pay special attention when changing direction. Apply light
pressure to the handle in order to lift the blade and facilitate
the turn. Turn the product around using the wheels as a
guide. Gradually release pressure on the handle and move
the blade back to the ground.
mWARNING! Stop the motor if the product strikes a
foreign object. Switch the product o, remove the battery,
and let it cool completely. Inspect the product thoroughly for
damage and have any damage repaired before restarting.
Extensive vibration of the product during operation is an
indication of damage. Immediately stop the motor and
promptly inspect and repair the tool.
After Use
Switch the product o, remove the battery, and let it cool
completely.
Check, clean, and store the product as described below.
Care + Maintenance
The Golden Rules for Care
mWARNING! Always switch the product o, remove the
battery, and let the product cool completely before inspecting,
cleaning, or performing any other maintenance task.
Keep the product clean. Remove any debris after each use
and before storage.
Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
Inspect the product before each use for worn and damaged
parts. If you nd broken and/or worn parts, do not use the
tool.
mWARNING! Only perform the repairs and maintenance
work described in this manual. Any other work must be
performed by a qualied technician.
General Cleaning
Clean the product with a dry cloth. Use a brush for areas
that are hard to reach.
Be sure to clean the air vents after every use with a cloth
and brush.
Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive, or other
aggressive detergents or disinfectants to clean this product as
such substances might damage the tool's surfaces.
Check for worn or damaged parts. Replace worn parts as
necessary or contact the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563) for
repair before using the product again.
Fig. 11
Loading ...
Loading ...
Loading ...