Loading ...
Loading ...
Loading ...
OPEARTING INSTRUCTIONS
12
LED DISPLAY
1 POWER: I / O
Touch the button once (flame will light up) to turn power on for all functions, keep the last flame color
once appliance off. Touch the button once more to turn all functions off and flame off.
2 FLAME ADJUSTMENT:
Touch the button to turn flame on. There are 7 colors in total . Press this button to change color.
The display will show Orange(A1), Green(A2), Blue(A3), Red(A4), Orange/Blue(A5), Orange / Green / Blue (A6) ,
Circle( A7)
3 HEATER CONTROL:
This fireplace consists of a fan forced electric heater with two heat settings: 600W (“HI” shown in display) and
1300 W (“H2” shown in display). Touch the button once (the icon will light up) to activate the heater at its low level
(700W). Touch the button once more to active the heater at its high level (1300W). When set in high level, touch
the button once again to deactivate the heater.
Note: The fan will continue to run for a short time and turns off automatically after the heater is turned off.
4 TEMPERATURE SETTING BUTTON:
Select the temperature display mode of Celcius (C) or Farenheit (F), simply press and hold button for 10 seconds
to change.
5 TIMER BUTTON:
Set the timer using the button (1 to 8 hours), press button once for 1 hour increments.
6 CHARCOALFIRE BUTTON:
Touch the button to turn charcoal fire on. There are 7 colors in total. Press this button to change color.
The display will show Orange (E1), Green (E2), Blue (E3), Red (E4), Red / Blue (Gradua) E5, Red / Green /
Blue (Gradua) E6, Circle E7
7 BACKLIGHT BUTTON:
Touch the button to turn flame on. There are 4 colors in total . Press this button to change color.
The display will show Orange (C1), Green(C2), Blue(C3), Circle(C4).
LED DISPLAY, Can display temperature, time, background color, flame color, heating switch, high and low heat
MASTER SWITCH
The master switch controls the power supply to the appliance. Turn the switch to “I” to
connect power and turn the switch to “O” to cut the power. There will be a chiming sound
when turning to “O”.
Power (I / O)
Loading ...
Loading ...