Loading ...
Loading ...
Loading ...
DOUBLE SAFETY LOCKING SYSTEM
This system ensures user can only switch the Table Blender on when the lid has been
placed and locked on the unit in correct position. The Table Blender can only be switched
on, when the accessories have been fixed properly.
BEFORE FIRST USE
Clean the Table Blender and parts thoroughly before you use the appliance for the first
time.
1. Wash the measuring cup, lid and glass blender jug before first use.
2. Ensure that the Table Blender is off and not connected to the mains electrical supply
before assembling.
3. Insert the glass blender jug into the blade base and then adjust the glass blender jug
so that it is locked into the blade base.
4. Place the lid on top of the glass blender jug and press down.
5. Place the measuring cup in the centre of the lid and turn it anti-clockwise to lock it
into the lid.
This is normal that the cover lid is a bit tight to remove from glass jug (under dry
condition) because of the secure sealing system. The lid would be easy to manage after
blending any kind of liquid ingredient
CAUTION: The blades are very sharp. Wash with care. Never touch the blade
with your finger.
THE GLASS BLENDER JUG
1. Screw the blade assembly unit to the glass jug bottom until it is fixed properly.
2. Place the glass jug with blade assembly unit interface on the motor unit.
3. Place the lid on the jug and lock onto the handle.
4. Insert the measuring cup into the lid opening
5. Connect to main power supply.
6. Select the speed by turning the knob or press the program button.
IMPORTANT: Never operate the blender when it is empty or if it is filled with solids. Do
not let the appliance operate more than 3 minutes continuously. Let the appliance cool
down to room temperature before operating the appliance again.
USING THE TABLE BLENDER
1. To switch on the appliance, turn the knob (9) to “ON” position. The Indication
light (10) will be illuminated.
2. To use the programmed function, turn the knob to “ON” position. The lighT
on the three buttons (5, 6, 7) will be illuminated. Press the programmed button, the
light on the specific button will be illuminated. When the program finished, the unit
will back to standby mode.
3. To control the rotary speed, turn the knob between “MIN” & “MAX” position.
Crush ice button
Press this button to crush the ice. The appliance starts crushing according to the pre-set
speed profile. The unit will stop automatically after the end of program. Press the button
again during operation will terminate the program and back to standby mode.
Smoothie button
Press this button to make delicious smoothies. The appliance starts mixing according to
the pre-set speed profile. The unit will stop automatically after the end of program. Press
the button again during operation will terminate the program and back to standby
mode.
Pulse button
Press this button to run the pulse mode. The unit operates only when pulse button was
pressed.
Tips
1. Do not blend dry, thick or heavy mixtures for more than 10 seconds continuously.
Let the appliance cool down to room temperature before continue operating the
appliance again.
2. Blend Ice, not more than 2 seconds continuously.
3. Do not place the lid into a dishwasher or boiling water, the lid may deform.
Clean the attachment by warm water is recommended.
4. Always hold the edge of the lid while operating the blender.
5. After every max operation period, please let the appliance cool down
to room temperature before continue operating the appliance again.
CLEANING AND MAINTENANCE
Disassembling and cleaning the Table Blender
1. Put the base unit (8) on a flat, dry table. Ensure that the control knob(9) is in
the off position and that the power cord is unplugged.
2. Hold the base unit with one hand and with the other hand lift up the glass jug (3).
3. Remove the jug lid from the glass jug.
The blender jug can be cleaned without disassembling
1. Fill in the glass jug half-full of Warm water and little cleaning agent. Let the Table
Blender run on min speed until the jug is cleaned.
2. Clean the glass jug (3), lid (2), measuring cup (1) and blade unit with the seal ring
with Warm water and some cleaning agent. Dry before using.
NOTE:
1. Do not clean the stainless steel base unit, power cord and plug with water. Wipe it
with a soft, moist cloth and some cleaning agent. Wipe with a dry cloth.
2. Never use aggressive cleaning agents.
3. Ensure that the glass jug is completely empty before you unscrew the retaining ring.
Be careful when handling the blade.
SPECIFICATIONS
220V-240V 50/60Hz
Rated power: 1000W
Capacity: 1.5L
Operating time: 3 minute cycles of continuous operation only
ENVIRONMENT FRIENDLY DISPOSAL
This marking indicates that this product should not be disposed of with other
household waste. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable re-use of material resources. To dispose of your appliance correctly,
please contact or take it to your local refuse/recycling centre. Alternatively,
contact your local council for information on your local re-use centre.
WARRANTY
IMPORTANT: In order for your warranty to be valid, you must keep your sales receipt. A
warranty CANNOT be claimed without proof of purchase.
We also highly recommend that you keep both your instruction manual and original
packaging. The original packaging will prove useful if you need to return your product.
Warranty exclusions:
The warranty will not be valid if:
1. The product has not been installed, operated or maintained in accordance
with the manufacturer's operating instructions provided with the product.
2. The product has been used for any purpose other than its intended function.
3. The damage or malfunction of the product is caused by any of the following:
- Incorrect voltage
- Accidents (including liquid or moisture damage)
- Misuse or abuse of the product
- Faulty or improper installation
- Mains supply problems, including power spikes or lightning damage
- Infestation by insects
- Tampering or modification of the product by persons other than
authorised service personnel
- Exposure to abnormally corrosive materials
- Insertion of foreign objects into the unit
- Usage with accessories not pre-approved by Brabantia
- General wear and tear, including, but not limited to, minor discolouration
and scratches
Please refer to and heed all warnings and precautions in this Instruction
Manual.
Due to continuous product development, specifications may be subject to
change without prior notification.
Loading ...
Loading ...
Loading ...