Loading ...
Loading ...
Loading ...
5
LEVELING:
The wine refrigerator should be installed on a Įrm and level surface that will be able to support the
eŶƟƌe weight of a fully loaded unit. It is important for the wine refrigerator to be leveled in order to
work properly. It can be raised or lowered by rotaƟŶŐ the ƉůĂƐƟĐ sheaths around each of the feet on the
ďŽƩŽŵ of the machine. If you ĮŶĚ that the surface is not level, rotate the feet ƵŶƟů the wine
refrigerator becomes level. You may need to make several adjustments to level it. We recommend using a
carpenter’s level to check the machine. Turn the leveling feet to the right to lower that side of the
refrigerator. Turn the leveling feet to the leŌ to raise that side of the refrigerator.
RECOMMENDED GROUNDING METHOD:
For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a
3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a maƟŶŐ 3-
pronged wall socket, and grounded in accordance with the NĂƟŽŶĂů Electrical Code and local codes and
ordinances. If a maƟŶŐ wall socket is not available, it is the personal responsibility of the customer to have a
properly grounded, 3-prong wall receptacle installed by a qualiĮed electrician.
Before you move your wine refrigerator into its ĮŶĂů ůŽĐĂƟŽŶ it is important to make sure you have the
proper electrical ĐŽŶŶĞĐƟŽŶ A standard electrical supply (115 V, 60Hz), properly grounded in accordance
with the NĂƟŽŶĂů Electrical Code and local codes and ordinances, is required. It is recommended that a
separate circuit, serving only your wine refrigerator, be provided. Use receptacles that cannot be
turned Žī by a switch or pull chain.
The fuse (or circuit breaker) size should be 15 Amps.
Installing Your Door Handle and Shelves
INSTALLING THE DOOR HANDLE:
1. Open the door and carefully pull the door gasket around the area where the handle is to be installed.
2. Insert each Phillips head screw through the gasket side of the door unƟl the screw passes through the
door.
3. Align the handle with the screws and Ɵghten using a Phillips head screwdriver ƵŶƟů the handle is ŇƵƐŚ
against the door frame.
ĂƵƟŽŶ Do not over-Ɵghten the screws as this may cause damage to the handle or to the stainless steel
door.
4. Carefully press the door gasket into its original ƉŽƐŝƟŽŶ
Electrical Shock Hazard!
Plug into a grounded 3-prong outlet.
Never remove the grounding prong from the plug.
Never use an adapter to bypass the grounding prong.
DO NOT use an extension cord.
Failure to follow these instrƵĐƟŽŶƐ can result in Įre, electrical shock, or personal injury.
Loading ...
Loading ...
Loading ...