Loading ...
Loading ...
Loading ...
Operation
12
Turning On
Touch the controls rmly with the at part of
your ngertips.
To turn on your cooktop, the master power
must rst be turned on by placing and
holding a nger over the circular area next to
the master power graphic for 2 seconds. An
audible beep will be heard and a light next to
the master power graphic will illuminate. If no
further entry is made, the cooktop will turn
itself off after a few seconds for safety
reasons.
To turn a burner on
Place a nger over the ON/OFF on the control
panel for the desired burner. An audible beep
will be heard again and a light will illuminate.
The heat level is chosen by holding a nger
over the circular areas marked with (+) or (-).
Touching the (+) rst will incrementally set the
heat level from settings 1 thru 8 with a beep
corresponding with the number of lights
illuminated.
If an element is activated, but no level chosen,
the element will automatically turn off in 10
seconds.
Turning Off
Touch the circular ON/OFF on the control
panel on the desired burner. Touch the ON/
OFF graphic for the master power to turn off
the entire cooktop.
Master Off
To power off both elements simultaneously,
touch the circular area next to the master
power ON/OFF graphic. This can be done
without deactivation of the elements if any are
in operation and acts as an important safety
feature. This allows the user a “one touch off”
in case of emergencies. All functions will no
longer operate until the master power is turned
on again.
Key graphic
for lock function
Lock function LED
Master power LED
Lock function button
Master power button
Master power graphic
Element indicator
graphic
Element heat level indicator
Hot surface
indicator LEDs
- button decreases
heat setting
+ button increases
heat setting
Element ON/OFF button
Element activation LED
Heat Boost
Touching the (-) rst will activate the heat
boost mode and will set heat level to the
highest setting. The setting will start at 8 and
incrementally decrease to heat level 1.
To change the heat level
Place a nger on (+) or (-) graphic of desired
element to change heat level incrementally up
or down.
THIS SECTION ONLY PERTAINS TO COOKTOPS THAT HAVE A
LOCK FUNCTION. IF YOUR COOKTOP DOES NOT HAVE THIS
FEATURE PLEASE SKIP AHEAD TO PAGE 13 AND 14.
Loading ...
Loading ...
Loading ...