Loading ...
Loading ...
Loading ...
Replace your brush bar
Your High Torque cleaner head with anti-tangle comb doesn't have a
washable brush bar. To maintain optimum performance, check your brush
bar regularly and clear any obstructions.
Make sure your machine is disconnected from the charger and take care not
to touch the trigger.
Clearing obstructions from your High Torque
cleaner head with anti-tangle comb
Remove your brush bar
Look for obstructions
Don’t put any part of your machine in a dishwasher or use detergents, polishes
or air fresheners.
Press the cleaner head release button on the end of the wand. Place the cleaner
head upside down.
Use a coin to unlock the end cap.
Twist the end cap and remove it from your brush bar. Don’t wash the end cap.
Slide your brush bar out of the cleaner head.
Push the end cap back on to your brush bar and slide it back into the cleaner
head.
Turn the end cap into the locked position.
Your cleaner head isn't washable and should only be wiped over with a damp
lint-free cloth.
Clear any debris from your brush bar.
Check inside the cleaner head and remove any debris or blockages.
Your High Torque cleaner head and brush bar aren't washable. Wipe over
with a damp lint-free cloth.
Don’t put any part of your machine in a dishwasher or use detergents,
polishes or air fresheners.
The lock located on the side of
the cleaner head, is rotated 90
°to release the end cap and the
brush bar can be removed.
The removal of the brush bars
showing the lock in a horizontal
position and the unlock symbol
at 90°anti-clockwise and lock
symbol at 90°clockwise.
Remove any hair or fibres that
have been wrapped around the
brush bar.
Loading ...
Loading ...
Loading ...