Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory.
483
Fuelling instruction:
1. Switch off the car and open the fuel filler
flap.
NOTE
After the fuel filler flap has been opened,
refuelling must take place within about 15
minutes. After this, the valve that was
opened by pressing the button to open the
fuel filler cap is closed, and it is no longer
possible to refuel because the pump nozzle
cuts out.
If the valve is closed before refuelling is
complete - press the button again and wait
until the driver display shows the message
Fuel tank Ready for refuelling.
2.
Choose fuel that is approved for use in the
car in accordance with the identifier
10
on
the inside of the fuel filler flap. See infor-
mation on approved fuels and identifier in
the section on "Petrol".
3. Insert the pump nozzle in the fuel filler
opening. The filler pipe has two opening
caps. The pump nozzle must be pushed
past both caps before refuelling is started.
4. Do not overfill the tank but fill until the
pump nozzle cuts out the first time.
> The tank is full.
NOTE
Overfilled fuel in the tank can overflow in
hot weather.
Topping up fuel from a fuel can
When filling with a fuel can, use the funnel
located in the foam block under the floor hatch
in the cargo area.
1. Open the fuel filler flap.
2. Insert the funnel in the fuel filler opening.
The filler pipe has two opening caps. The
funnel's pipe must be pushed past both
caps before filling can be started.
Applicable to cars with fuel-driven
auxiliary heater*
Never use the fuel-driven heater when the car
is in a filling station area.
10
The identifier in accordance with the CEN standard EN16942 is located on the inside of the fuel filler flap, and will be on corresponding fuel pumps and their nozzles at filling stations throughout
Europe by 12 October 2018 at the latest.
Loading ...
Loading ...
Loading ...