Loading ...
Loading ...
Loading ...
19
4. Place wall plate template
11
at your desired height and position over your stud center line(s). Level wall plate template
11
and tape in place.
CAUTION: Avoid potential personal injury or property damage! SINGLE STUD installs MUST use the center holes in the stud as shown.
NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com.
IMPORTANT: Be sure you mark and drill into the center of the stud.
5. Drill the four pilot holes using a 1/2 in. (13 mm) diameter drill bit in the locations illustrated for double stud or single stud installs.
IMPORTANT: Pilot holes must be drilled to a depth of 1 in. (25 mm).
4
STUD
STUD
STUD
STUD
STUD
STUD
DRYWALL
DRYWALL
5
1 in. (25 mm)
1/2 in.
(13 mm)
12 12
12 12
DOUBLE STUD DOUBLE STUD
SINGLE STUD SINGLE STUD
Loading ...
Loading ...
Loading ...