Loading ...
Loading ...
Loading ...
Using with a Computer
UR44C Operation Manual 25
Recording/Playback
This section explains simple recording operations for
using a microphone. Connect a microphone or electric
guitar to [MIC/HI-Z 1] jack as shown in the connection
examples (page 23). Turn the [+48V] switch on when
using a phantom powered condenser microphone.
Cubase Series Programs
1. Launch the Cubase series DAW and display
the [steinberg hub] window.
2. Select the template [Empty] in [Recording]
on the [steinberg hub] window, then click
[Create].
3. Turn on Direct Monitoring as follows.
[Studio] [Studio Setup] [Yamaha Steinberg
USB ASIO] (Windows) or [Steinberg UR44C] (Mac)
enter checkmark to [Direct Monitoring] [OK]
4. Return to the project window and click
[Project]
[Add Track] [Audio] to display
[Add Track].
5. Select the [Audio Inputs] and
[Configuration] to [Mono] and [Count] to [1],
and then click [Add track] to create one new
audio track.
6.
Confirm that the [Record Enable] and
[Monitor] indicators are turned on (lit) for the
added audio track.
7.
While singing into the microphone or guitar,
adjust the input signal level of the
microphone with the [INPUT 1 GAIN] knob on
the device.
8. While singing into the microphone or guitar,
adjust the output signal level of the
headphones with the [PHONES] knob on the
device.
9. Click to start the recording.
10.
After finishing the recording, click to stop
it.
11. Turn [Monitor] off (unlit) for the just
recorded audio track.
12. Click the Ruler to move the project cursor to
the desired point for starting playback.
13.
Click to check the recorded sound.
When listening to the sound over monitor speakers,
adjust the output signal level by the [OUTPUT] knob
on the device.
The recording and playback operations are now
complete.
For more detailed instructions on using Cubase series
programs, refer to the Cubase operation manual.
Setting optimum recording levels
Adjust the [INPUT GAIN] knobs so that the [PEAK]
indicator flashes briefly at the loudest input volume.
Loading ...
Loading ...
Loading ...