Sun Joe 24V-TLR-LTE-SJG-RM 24-Volt iON+ Cordless Garden Tiller + Cultivator Kit W/ 2.0-Ah Battery and Charger Certified Refurbished, Green

User Manual - Page 13

For 24V-TLR-LTE-SJG-RM.

PDF File Manual, 20 pages, Read Online | Download pdf file

24V-TLR-LTE-SJG-RM photo
Loading ...
Loading ...
Loading ...
13
mWARNING! Do not place hands, feet, or any other part
of the body or clothing near the rotating blades or any other
moving part. The blades begin to rotate forward once the
ON/OFF trigger is depressed. The blades continue to rotate
until the ON/OFF trigger is released. Failure to avoid contact
with the rotating blades could cause serious personal injury.
Do not try to till too deeply or force the product into soil that
is extremely hard or resistant.
Walk the product through the soil at a normal pace and in
as straight a line as possible.
Till in slightly overlapping rows. To till most eectively,
follow the pattern indicated in Fig. 11. Start by moving the
tiller + cultivator up and down in vertical lines, then work
horizontally from left to right. This will keep the rows even
and ensure that all the ground is tilled without missing any
spots.
Pay special attention when changing direction.
Apply light pressure to the handle in order to lift the blades
and facilitate the turn. Turn the product around using the
wheels as a guide. Gradually release pressure on the handle
and move the blades back to the ground.
mWARNING! Stop the motor if the product strikes a
foreign object. Switch the product o, remove the battery,
and let it cool completely. Inspect the product thoroughly for
damage and have any damage repaired before restarting.
Extensive vibration of the product during operation is an
indication of damage. Immediately stop the motor and
promptly inspect and repair the tool.
After Use
Switch the product o, remove the battery, and let it cool
completely.
Check, clean, and store the product as described in
Care + Maintenance.
Care + Maintenance
The Golden Rules for Care
mWARNING! Always switch the product o, remove the
battery, and let the product cool completely before inspecting,
cleaning, or performing any other maintenance task.
Keep the product clean. Remove any debris after each use
and before storage.
Regular and proper cleaning will help ensure safe use and
prolong the life of the product.
Inspect the product before each use for worn and damaged
parts. If you nd broken and/or worn parts, do not use the
tool.
mWARNING! Only perform the repairs and maintenance
work described in this manual. Any other work must be
performed by a qualied technician.
General Cleaning
Clean the product with a dry cloth. Use a brush for areas
that are hard to reach.
Be sure to clean the air vents after every use with a cloth
and brush.
Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive, or other
aggressive detergents or disinfectants to clean this product as
such substances might damage the tool's surfaces.
Check for worn or damaged parts. Replace worn parts as
necessary or contact the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563)
for repair before using the product again.
Cleaning the Underbody + Working Tool
mWARNING! Wear safety gloves when working on or
near the working tool. Use appropriate tools (e.g a wooden
stick) when necessary; never use your bare hands!
Keep the underbody and blades clean and free of debris.
Use a brush or another implement to remove soil from the
working tool.
All nuts and bolts must be checked periodically for
tightness before operation. After prolonged use, especially
in sandy soil conditions, the working tool will become worn
and lose some of its original shape. Tilling eciency will be
reduced and the working tool should be replaced.
Have worn or damaged working parts replaced with new
ones of the same type by a qualied technician.
To prolong the life span of the working tool and the product,
lubricate the blades after each use.
Fig. 11
Loading ...
Loading ...
Loading ...