Loading ...
Loading ...
Loading ...
6 7
USER SERVICING INSTRUCTIONS
CLEANING AND STORAGE
• Ensure the fan is turned off and unplugged.
• Use only a soft cloth to gently wipe the outer surfaces of the fan clean.
• To clean between the grills and fan blade area, we recommend using a pipe cleaner, flexible
dust wand, vacuum cleaner or compressed air to gently remove the dust.
• To clean the rear grill use a soft dry cloth.
• DO NOT immerse the fan in water and never allow water to drip into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• For storage, you may leave the fan assembled and covered to protect it from dust. Store the
fan in a cool, dry place.
CONSUMER RELATIONS
Mail questions or comments to:
Kaz USA, Inc.
Consumer Relations Dept.
250 Turnpike Road
Southborough, MA 01772
Please be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY.
DO NOT RETURN
TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR
HOUSING YOURSEL
F, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE FAN OR PERSONAL
INJURY.
Call us toll-free at: 1-800-477-0457
E-mail: [email protected]
Or visit our website at:
www.honeywellpluggedin.com/fans
ON/OFF
Press the Power button ( ) once to turn the fan on. Press the Power
button a second time to turn the fan off.
SPEED CONTROL
The fan will automatically start on “Sleep” speed when initially turned
on. To adjust the speed up or down, press the Fan Speed button (
)
repeatedly to increase level.
OSCILLATION
To activate the Oscillation feature, press the Oscillation button
(
) once. Press the Oscillation button again to turn the Oscillation
feature off.
REMOTE CONTROL STORAGE
When it is not in use, the remote control may be stored in the recessed
area located behind the controls (Fig. 10).
Each time the fan is powered on ( ) the control panel light will be set at
100% brightness.
Choose from 5 settings for your control panel lighting preference:
• Press the Light button ( ) once for 75% brightness.
• Press the Light button ( ) twice for 50% brightness.
• Press the Light button ( ) a third time for 25% brightness.
• Press the Light button ( ) a fourth time for no light.
• Press the Light button ( ) a fifth time for100% brightness.
HYF290 SERIES REMOTE CONTROL OPERATION
HYF290 SERIES NIGHTTIME LIGHT DIMMING FEATURE
Fig. 10
THIS DEVICE (HYF260 and HYF290 SERIES ONLY) COMPLIES WITH PART 15 OF THE FCC RULES
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
Please note that changes or modifications of this product not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Loading ...
Loading ...
Loading ...