Loading ...
Loading ...
Loading ...
FEATURES
A. Freezer compartment
B. Refrigerator compartment
1. Ice cube tray
2. Plastic ice scraper
3. Freezer shelf
4. Thermostat box
5. Refrigerator shelves
6. Crisper cover
7. Crisper
8. Leveling feet
9. Bottle shelf
10. Door shelves
11. Egg tray
3
1
2
3
5
6
7
4
8
10
9
11
A
B
LOCATION
• Two people should be used when moving the
appliance.
• Remove interior and exterior packaging prior to
installation. Wipe the outside of the appliance
with a soft, dry cloth and the inside with a
lukewarm wet cloth.
• Place the appliance on a fl oor that is strong
enough to support it when it is fully loaded.
• Do not place the appliance in direct sunlight or
near sources of heat, such as a stove or heater,
as this can increase electrical consumption.
Extreme cold ambient temperatures may also
cause the appliance to perform improperly.
• Do not use the appliance near water, for
example in a wet basement or near a sink.
• This appliance is intended for household use
only. It is not designed for outside installation,
including anywhere that is not temperature
controlled (garages, porches, vehicles, etc.).
• Before connecting the appliance to a power
source, let it stand upright for approximately
6 hours. This will reduce the possibility of a
malfunction in the cooling system from handling
during transportation.
• This appliance is only intended for free-standing
installation. It is not intended to be built into
a cabinet or counter without following the
minimum air circulation requirements.
• Minimum air circulation requirement: Allow
5 cm (2 inches) of space on both sides of the
appliance. Allow 10 cm (4 inches) of space on
the top of the appliance. Allow 7.5 cm (3 inches)
of space between the back of the appliance and
the wall.
• WARNING - Placing this appliance into any
enclosed location with a door or without the
minimal amount of air space described above
will VOID YOUR WARRANTY, increase energy
usage, and reduce this appliance’s performance
and lifespan.
LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...