Kanto TUKMW TUK Matte White Bluetooth Premium Powered Speakers

User Manual - Page 13

For TUKMW.

PDF File Manual, 16 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
13
U
U
RCAPHONO
GND
L R L R
SUB
OUT
L R
SUB
OUT
SUB
SUB
Connecting a Subwoofer
TUK is equipped with an RCA connector to provide output signal to a powered subwoofer. Simply
connect a single RCA subwoofer cable from the SUB OUT connection on TUK to the AUDIO INPUT
on your subwoofer. If your sub-woofer has a stereo L / R RCA input, either left or right inputs will
work.
We recommend the Kanto sub6 or sub8 powered subwoofer with crossover and volume controls.
Most quality subwoofers oer these controls, which allow you to customize the amount of bass
you will experience.
Look for details on the Kanto website at: www.kantoaudio.com
Sub Mute
You can mute the sub output on TUK. This can be helpful in situations where you want to listen to
your speakers but dont want to disturb the neighbors with sub-bass.
To mute the sub output, press the SUB button. The LED will blink to conrm the
sub output is muted. To un-mute the sub output, press the SUB button again. The
LED will blink to conrm that the sub output has been un-muted. The sub output
will be reactivated upon waking up from standby.
Active Crossover
TUK is equipped with an active crossover lter at 80 HZ to allow for advanced
setup with subwoofers. Activating the crossover will reduce the bass extension
of the main speakers, allowing them to focus on the mid and high frequencies, while reducing the
high frequency output of the SUB OUT port. If your Sub has an adjustable bandwidth or crossover
frequency setting, it can be adjusted to the highest or most open setting.
Active Crossover is disabled by default. You can activate Active Crossover by
pressing and holding the SUB button for 5 seconds. The front panel LED will
blink twice to indicate that the crossover has been activated. You can deactivate
the crossover by pressing and holding the SUB button for 5 seconds. The front
panel LED will blink once to indicate that the crossover has been deactivated. The
crossover is disabled by default or when power is removed.
Loading ...
Loading ...
Loading ...